ITT A4 Color WHT:A4 Covers 2007

Transcript

1 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 43 Non-Adjustable Series Hydraulic Shock Absorbers PM PM, PRO Series Overview PMXT 1525/2150 Mid-Bore Series PM 120/225 Small-Bore Series Non-Adjustable Series PM 15/100 Small-Bore Series E nidine non-adjustable hydraulic shock absorbers can accommodate varying energy conditions. This family of tamperproof shock absorbers provides consistent performance, cycle after cycle. Non-adjustable models are designed to absorb maximum energy within a compact envelope size. The PM Series uses a self-compensating design to provide energy absorption in low velocity and high drive force applications. The Platinum PM Series also includes the added benefit of corrosion-resistant, nickel-plated components and positive stop capabilities. Models can accommodate a wide range of operating conditions with varying masses or propelling forces. PRO Series has unique progressive damping and a multi-orifice design that provides softer stops for medium-to-high The Platinum impact velocities and fragile loads. The Platinum PRO Series also includes the added benefit of corrosion-resistant, nickel-pla ted components and positive stop capabilities. Models can accommodate a wide range of operating conditions. Features and Benefits • Extensive non-adjustable product line offers flexibility in • Threaded cylinders provide mounting both size and energy absorption capacity to fulfill a wide flexibility and increase surface area for range of application requirements. improved heat dissipation. • Tamperproof design ensures repeatable performance. • A select variety of surface finishes maintains original quality appearance and provides the longest corrosion resistance protection. • Special materials and finishes can be designed to meet specific customer requirements. • ISO quality standards result in reliable, long-life operation. • Incorporating optional fluids and seal packages can expand the standard operating temperature range from (-10°C to 80°C) to (–30°C to 100°C). Email: [email protected] Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 www.enidine.eu 43

2 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 44 Non-Adjustable Series Hydraulic Shock Absorbers PM PM, PRO Series Overview Enidine Non-Adjustable Multiple Orifice Shock Absorbers Non-Adjustable Series Cylinder Piston Rod Check Ring Piston Head Bearing Orifice Hole Location Foam Accumulator Oil Coil Spring Shock Tube provides deceleration with a gradually increasing shock force. The initial minimal resistance at impact Progressive damping protects delicate loads and machinery from damage. Progressive damping shock absorbers also have built-in self-compensation, so they can operate over a wide range of weights and velocities. This type of damping provides smooth deceleration in applications where energy conditions may change. maintains acceptable deceleration with conventional type damping characteristics. Self-compensating Self-compensating damping shock absorbers operate over a wide range of weights and velocities. These shock absorbers are well suited for high drive force , low velocity applications, and where energy conditions may change. Curve A shows the shock force vs. stroke curve of a self-compensating shock absorber impacted with a low velocity and high drive force. Curve B shows the shock force vs. stroke curve of a self-compensating shock absorber impacted with a high velocity and low drive force. As the piston head moves it closes off orifice holes, thus The design of a multi-orifice shock absorber features a double cylinder arrangement with space between the reducing the available orifice area in proportion to the velocity. concentric shock tube and cylinder, and a series of orifice After the load is removed the coil spring pushes the piston rod holes drilled down the length of the shock tube wall. outward. This unseats the check ring and permits the oil to flow from the accumulator and across the piston head, back into the During piston movement, the check ring is seated and oil shock tube. This allows quick repositioning for the next impact. is forced through the orifices in the shock tube wall, into the Low Pressure multiple orifice shock absorbers can provide closed cellular foam accumulator and behind the piston head. progressive or self-compensating damping, depending on the impact conditions. Fax: +49 7621 98679-29 Email: [email protected] www.enidine.eu Tel.: +49 7621 98679-0 44

3 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 45 Non-Adjustable Series Hydraulic Shock Absorbers PM PM, PRO Series Ordering Information/Application Worksheet Shock Absorbers Example 2: Custom Orifice Products* Example 1: Standard Products APPLICATION MC 2B - 10 PRO 50 10 PRO 100MF DATA Select Select Select Select Select damping Specify: catalog quantity quantity catalog constant • Vertical, rotary or horizontal motion number number from appropriate • Weight sizing graph • Impact velocity Select thread • Propelling force (if any) *Enidine will specify designation Select piston rod type • Other (temperature or other individual part number from engineering • “–” (without button) environmental conditions) for each application. data chart • “B” (with button) • Cycles per hour (If applicable) • “CM” (Clevis mount) • “CMS” (Clevis mount with spring) Non-Adjustable Series Accessories Example 1 Example 2 Urethane Striker Cap Universal Mounting Flange UC 8609 10 UF M10 x 1 5 (P/N U16363189) (P/N C98609079) Select Select quantity quantity Select catalog/part number Select catalog/part number Application Worksheet FAX NO.: DATA APPLICATION DESCRIPTION DATE: ATTN: COMPANY: Motion Direction (Check One): Angle _______ Up ■ ■ The Enidine Application Worksheet makes shock absorber ■ Horizontal ■ ■ ■ ■ Incline ■ Vertical Height _______ ■ ■ Down sizing and selection easier. Up ■ ■ ■ Rotary Horizontal ■ ■ ■ Rotary Vertical ■ ■ Down Fax, phone, or mail worksheet data to Enidine headquarters __________________________________________________ (Kg) Weight (Min./Max.): or your nearest Enidine subsidiary/affiliate or distributor. Cycle Rate : ____________________________________________________ (cycles/hour) (See catalog back cover for Enidine locations, or visit (N) Additional Propelling Force (If known): _______________________________ www.enidine.eu for a list of Enidine distributors.) ■ ______ (bar) Rod Dia. ■ Air Cyl: Bore (mm) ______ (mm) Max. Pressure ______ Upon Enidine’s receipt of this worksheet, you will receive Hydraulic Cyl: Bore (mm) Max. Pressure ______ ■ ■ (bar) ______ a detailed analysis of your application and product Rod Dia. ___ (mm) recommendations. (For custom design projects, Enidine cation representatives will consult with you for specifi (Nm) ■ Motor _____________ (kW) Torque _____________ ■ requirements.) Ambient Temp.: (° C) ___________________________________________________________ Environmental Considerations: _____________________________________________ GENERAL INFORMATION __________________________________________________________________________________ CONTACT: (All Data Taken at Shock Absorber) SHOCK ABSORBER APPLICATION DEPT/TITLE: Number Shock Absorbers to Stop Load COMPANY: _________________________________________ Impact Velocity (min./max.): (m/s) ______________________________ Shock Absorber Stroke Requirements: (mm) ADDRESS: 2 _______________ ) (a) Load Requirements: (m/s RATE CONTROL APPLICATION (All Data Taken at Shock Absorber) TEL: FAX: Number of Rate Controls to Control the Load: ___________________________ EMAIL: ■ ■ Compression (C) ■ Control Direction: Tension (T) ■ PRODUCTS MANUFACTURED: __________ _____________________ Required Stroke: (s) (mm) Est. Stroke Time : (m/s) ______________________________ Estimated Velocity at the Rate Control: Email: [email protected] Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 www.enidine.eu 45

4 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 46 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Micro and Small-Bore Series Technical Data Standard Non-Adjustable Series PM 100M Series ➞ PM 15M PMX 8M ➞ PMX 10M Series ØD ØD ØG ØE * 1 ØE * ØG 1 J C H J WL C F A * WF H 1 F * A 1 ØD ØD ØG ØG C J H F C A J WL WF H F A *Note: A apply to button models and urethane striker cap accessory. and E 1 1 F F Nominal Coil Spring Force D P E (S) Max. C Max. E T T Extended Compressed Mass Propelling Reaction Max. Max. Stroke Catalog No./ Nm/c mm Model Nm/hr Force N N N Force N g 6,4 3,0 5 650 890 2,7 5,6 200 16 PMX 8 (B) 28 7,0 6,0 12 400 1 600 2,2 4,5 350 PMX 10 (B) 10,4 PM 15 (B) 28 200 2 000 3,0 7,0 220 56 10,0 12,7 20,0 34 000 2 800 4,5 11,0 890 68 SPM 25 (B) 4,5 PM 25 (B) 2 800 16,0 26,0 11,0 890 68 40 000 3 750 123 1 600 15,0 6,0 45 200 28,0 12,7 SPM 50 (B) 53 700 8,9 54,0 22,0 PM 50 (B) 30,0 1 600 136 3 750 90,0 70 000 5 500 13,0 27,0 2 200 297 PM 100 (B) 25,0 CDE WL WF Damping A A J H G F Catalog No./ 1 1 Model mm mm mm mm mm mm mm mm mm Constant mm PMX 8MF (B) -1,-2,-3 M8 x 0,75 Δ 2,5 57,0 – 47,0 6,8 40,9 6,6 4,6 2,5 – M8 x 1,0 PMX 8MC (B) -1,-2,-3 Δ 54,0 64,0 M10 x 1,0 3,2 8,6 46,5 8,6 4,6 3,3 – – PMX 10MF (B) -1,-2,-3 Δ 72,4 9,9 3,2 10,2 52,1 PM 15MF (B) 6,9 2,5 11,0 9,5 -1,-2,-3 62,2 M12 x 1,0 1,0 -1,-2,-3 M14 x 1,0 11,2 69,5 10,8 5,1 92,2 12,0 12,7 SPM 25MF (B) Δ 82,7 4,0 92,2 M14 x 1,5 Δ 82,7 SPM 25MC (B) 69,5 10,8 -1,-2,-3 5,1 81,3 PM 25MF (B) 97,5 107,2 M14 x 1,0 11,2 -1,-2,-3 10,9 7,6 1,0 12,0 12,7 4,0 PM 25MC (B) -1,-2,-3 97,5 107,2 M14 x 1,5 10,9 81,3 7,6 -1,-2,-3 87,9 99,9 M20 x 1,5 74,4 SPM 50MC (B) 12,7 1,0 12,7 7,6 4,8 18,0 16,3 95,5 M20 x 1,5 -1,-2,-3 PM 50MC (B) 118,5 130,3 -1,-2,-3 M25 x 1,5 PM 100MF (B) 141,5 12,7 23,0 6,4 15,7 102,6 22,0 12,7 4,6 128,8 M27 x 3,0 -1,-2,-3 PM 100MC (B) Notes: 1. Δ = Non-standard lead time items, contact Enidine. 2. (B) indicates button model of shock absorber 3. See page 57 for constant damping curves. Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 www.enidine.eu Email: [email protected] 46

5 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 47 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series Accessories ➞ PM 100M Series PMX 8M Stop Collar (SC) PMX8M PMX10M CD ØCD CB HEX JAM NUT CA CA HEX JAM NUT (NOT INCLUDED) (NOT INCLUDED) PM100M ➞ PM15M Non-Adjustable Series WF ØCD WL HEX JAM NUT CA (NOT INCLUDED) WL WF CD CB CA Mass Catalog No./ Model Ref Part Number mm g mm mm mm mm Model Δ 23 – 14,0 12,0 19,0 PMX 8MF (B) M99137175 SC M8 x 0.75 – Δ SC M8 x 1 M99137058 PMX 8MC (B) 19,0 12,0 14,0 – – 23 Δ 11 19,0 SC M10 x 1 M98921058 PMX 10MF (B) – 14,3 – – Δ 19,0 SC M12 x 1 M930289171 PM 15M (B) 14 14,0 – 16,0 9,0 Δ SC M14 x 1.5 M930281171 SPM/PM 25MF (B) 25,4 – 21,0 19,0 12,0 38 Δ – 12,0 17,0 18,0 20 SPM/PM 25MF (B) M930286171 SC M14 x 1 25,4 Δ 63 SC M20 x 1.5 M930282171 SPM/PM 50M (B) 38,0 – 25,0 22,0 12,0 15,0 32,0 38,0 – 44,5 PM 100MF (B) M930284171 SC M25 x 1.5 Δ 215 Note: 1. Δ = Non-standard lead time items, contact Enidine. Jam Nut (JN) Part Number Mass JH JB JA Model Ref Catalog No./ mm mm g mm Model 1 2 , 0 JN M8 x 0.75 4 , 0 2 8MF (B) PMX J29137185 1 4 , 0 JN M8 x 1 J29137035 PMX 8MC (B) 14,0 12,0 4,0 2 JA PMX 10MF (B) 15,0 13,0 JN M10 x 1 2 J24421167 3,2 2 4,0 15,0 17,3 PM 15M (B) J25588035 JN M12 x 1 JB JN M14 x 1 J24950035 SPM/PM 25MF (B) 19,7 17,0 4,0 3 3 SPM/PM 25MC (B) J23935035 19,7 17,0 4,0 JN M14 x 1.5 JH 9 J22646035 SPM/PM 50MC (B) 27,7 24,0 4,6 JN M20 x 1.5 PM 100MF (B) 37,0 32,0 4,6 15 J23004167 JN M25 x 1.5 Tel.: +49 7621 98679-0 Fax: +49 7621 98679-29 Email: [email protected] www.enidine.eu 47

6 A4-Metric:Project1-A4-Metric 2/13/08 9:00 AM Page 48 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series Accessories ➞ PMX 8M PM 100M Series Non-Adjustable Series Side Load Adaptor (SLA) E WF ØS C ØD WL HEX JAM NUT A B STROKE (NOT INCLUDED) A E S WF WL Part Catalog No./ Model D B C Stroke mm mm mm mm mm mm mm Ref Number Model mm M10 x 1 5,0 21,9 13,0 11,0 4,0 SLA 10MF SLA 33457 PMX 10MF (B) 6,4 12 11 M12 x 1 SLA 12MF 32,4 14,0 13,0 7,0 SLA 33299 PM 15MF (B) 10,0 18 14 6,0 7,0 26 8,0 45,2 18,0 15,0 M14 x 1 16,0 PM 25MF (B) SLA 33297 SLA 14MF Δ 13 13 SLA 14MC 8,0 45,2 18,0 15,0 7,0 SLA 33298 PM 25MC (B) 16,0 26 M14 x 1,5 12,7 16 M14 x 1 8,0 39,2 18,0 15,0 7,0 Δ SLA 14MFS SLA 33306 SPM 25MF (B) 20 20 16 39,2 18,0 15,0 7,0 8,0 SLA 14MCS SLA 33301 SPM 25 MC (B) 12,7 M14 x 1,5 17 M20 x 1,5 11,0 62,0 25,0 22,0 7,0 SLA 20MC SLA 33302 PM 50MC (B) 22,0 32 24 14 11,0 41,5 25,0 22,0 7,0 SLA 20MCS SLA 33262 SPM 50MC (B) 12,7 M20 x 1,5 7,0 38 15,0 73,2 36,0 32,0 M25 x 1,5 25,4 PM 100MF (B) SLA 33263 SLA 25MF 30 38 30 M27 x 3 15,0 73,2 36,0 32,0 10,0 SLA 27MC SLA 33296 PM 100MC (B) 25,4 Notes: 1. Maximum sideload angle is 30°. = Non-standard lead time items, contact Enidine. Δ 2. Universal Retaining Flange (UF) UF M10 x 1 ➞ UF M14 x 1,5 UF M20 x 1,5 ➞ UF M27 x 3 K Ø4,5 I Ø5,5 A A B F F B Ø8,0 Ø8,0 E E D Ø4,5 5,0 J H Ø5,5 D G G C C Catalog No./ Part Model A B C D E F G H I J K mm Model Ref mm mm mm Number mm mm mm mm mm mm – 12,5 – 5,0 Δ UF M10 x 1 U16363189 PMX 10MF (B) M 1 0 x 1 38,0 12,0 6,0 6,25 25,5 25,0 6,25 Δ PM 15MF (B) M 1 2 x 1 38,0 12,0 6,0 U15588189 25,5 25,0 12,5 – 5,0 – UF M12 x 1 Δ UF M14 x 1 U14950189 PM/SPM 25MF (B) M14 x 1,5 45,0 16,0 8,0 5,0 35,0 30,0 15,0 – 5,0 – – Δ UF M14 x 1.5 U13935143 PM/SPM 25MC (B) M14 x 1,5 45,0 16,0 8,0 5,0 35,0 30,0 15,0 – 5,0 Δ U12646143 PM/SPM 50MC (B) M20 x 1,5 48,0 16,0 8,0 6,5 35,0 35,0 – 4,75 10,0 25,5 UF M20x 1.5 Δ UF M25 x 1.5 U13004143 PM 100MF (B) M25 x 1,5 48,0 16,0 8,0 6,5 35,0 35,0 – 4,75 10,0 25,5 35,0 35,0 Δ U12587143 PM 100MC (B) M27 X 3 48,0 16,0 8,0 6,5 UF M27 x 3 – 4,75 10,0 25,5 Note: 1. Δ = Non-standard lead time items, contact Enidine. 2. All dimensions in millimeters. www.enidine.eu Tel.: +49 7621 98679-0 Email: [email protected] Fax: +49 7621 98679-29 48

7 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 49 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Small-Bore Series Technical Data PM 225M Series PM 120M ➞ Standard ØD ØE * ØE 1 C J WL WF F A * A 1 Non-Adjustable Series apply to button models and urethane striker cap accessory. *Note: A and E 1 1 F F Nominal Coil Spring Force D P Max. SE E C Max. T T Catalog No./ Stroke Max. Max. Re action Extended Co mpressed Propelling Mass Nm/c Model mm Nm/hr Force N N N g Force N PM 120MF (B) 160,0 75 700 25,0 11 120 56,0 89,0 3 100 482 595 PM 125MF (B) 25,0 160,0 91 000 3 100 89,0 56,0 11 120 3 100 90 300 652 PM 220MF (B) 50,0 310,0 11 120 31,0 89,0 765 3 100 PM 225MF (B) 50,0 310,0 111 000 11 120 31,0 89,0 A Damping WF WL Catalog No./ F CDEE J A 1 1 mm mm mm Constant mm Model mm mm mm mm mm 30,5 -1,-2,-3 145,3 M33 x 1,5 9,5 29,0 PM 120MF (B) 87,0 5,3 30,0 16,0 140,2 PM 125MF (B) 29,0 140,2 145,3 M36 x 1,5 9,5 30,5 87,0 16,0 33,0 5,3 -1,-2,-3 PM 220MF (B) -1, 207,0 -2,-3 16,0 30,0 5,3 128,0 30,5 29,0 9,5 M33 x 1,5 212,0 -1, PM 225MF (B) -2, -3 207,0 212,0 M36 x 1,5 9,5 29,0 30,5 128,0 5,3 33,0 16,0 Notes: 1. Dash numbers in page color are non-standard lead time items, contact Enidine. 2. See page 57 for constant damping curves. Fax: +49 7621 98679-29 Email: [email protected] Tel.: +49 7621 98679-0 www.enidine.eu 49

8 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 50 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Small-Bore Series Accessories PM 120 CM(S) ➞ PM 225 CM(S) Series Non-Adjustable Series Clevis Mount HEX JAM NUT (NOT INCLUDED) SPRING OPTIONAL ØS ØU ØM ØN CR V X P Q W L MN PQ L Catalog No./ V +0,13/-0,00 +0,00/-0,25 S U +0,13/-0,00 W X CR Mass +0,00/-0,25 Model mm mm mm mm mm mm mm mm mm mm mm Kg 23 Δ 6,38 6,38 12,70 12,70 38 167 6 12 6,1 11,2 0,59 PM 120 CM (S) 0,77 PM 220 CM (S) 234 6,38 6,38 12,70 12,70 38 23 6 12 6,1 11,2 Δ 22 12,70 12,70 6,38 38 0,73 11,2 6,0 24 6 Δ PM 125 CM (S) 180 6,38 PM 225 CM (S) 6 22 0,86 11,2 6,0 24 Δ 38 230 6,38 6,38 12,70 12,70 Δ Notes: 1. = Non-standard lead time items, contact Enidine. 2. “S” designates model is supplied with spring. Flange Foot Mount ØFC FD FG FE FB FK Z + STROKE Y + STROKE FJ FA Bolt Kit Part Model Y Z Catalog No./ FB FC FD FE FG FJ FK Size Mass FA Ref mm Model Number g mm mm mm mm mm mm mm mm mm mm 5,90 FM M33 x 1.5 PM 120/220M 57,2 31,8 70,0 60,3 2F21049306 45,0 12,7 22,7 6,4 22,2 M5 100 FM M36 x 1.5 2F21293306 100 PM 125/225M 57,2 31,8 70,0 60,3 5,90 45,0 12,7 22,7 6,4 22,2 M5 Notes: 1. Shock absorber must be ordered separately from foot mount kit. 2. All foot mount kits include two foot mounts. Tel.: +49 7621 98679-0 Email: [email protected] Fax: +49 7621 98679-29 www.enidine.eu 50

9 A4-Metric:Project1-A4-Metric 4/10/08 8:42 AM Page 51 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series Accessories PM 225M Series ➞ PM 120M Stop Collar (SC) Metric WF ØCD WL HEX JAM NUT (NOT INCLUDED) CA Non-Adjustable Series Catalog No./ Part Model CA CD WF WL Mass mm Number Ref g mm mm Model mm M930290171 SC M33 x 1.5 17,0 PM 120/220M 41,0 38,0 36,0 210 41,0 210 43,0 18,0 SC M36 x 1.5 M930285171 PM 125/225M 63,5 Jam Nut (JN) JA JB JH JH JB JA Mass Catalog No./ Part Model Model Number Ref mm mm mm g J28609035 JN M33 x 1.5 PM120/220M 27 43,8 38,0 6,4 27 JN M36 x 1.5 J23164035 PM125/225M 47,3 41,0 6,4 Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] www.enidine.eu 51

10 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 52 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series Overview PM 225M Series ➞ PM 120M Non-Adjustable Series Urethane Striker Cap (USC) ØE 1 A E A Model Part Catalog No./ 1 Mass g Model Number Ref mm mm UC 8609 30 120/125M, 220/225M PM C98609079 30,5 10,0 Rectangular Flange (RF) LOCK SLOT ØFC SA SB RD FH RE Bolt Catalog No./ Part SB Size Mass Model FH RD RE FC SA g mm mm mm mm Ref Number Model mm mm mm 41,3 50,8 44,5 28,6 M5 30 RF M33 x 1.5 N121049141 PM 120/ 220M 5,5 9,5 N121293129 PM 125/225M 30 44,5 28,6 50,8 41,3 9,5 5,5 M5 RF M36 x 1.5 www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 52

11 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 53 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Technical Data PMXT 2150M Series ➞ PMXT 1525M Standard WL * ØE ØE 1 ØD C WF F A * A 1 *Note: A and E apply to urethane striker cap accessory. 1 1 Non-Adjustable Series F F D P Nominal Coil Spring Force Max. (S) E E C Max. T T Compressed Propelling Max. Max. Stroke Catalog No./ Mass Reaction Extended Nm/c Nm/hr Force N N N Force N Kg Model mm 29 000 6 700 PMXT 1525MF 1,0 25,0 48,0 367,0 126 000 68,0 1,1 50,0 735,0 167 000 29 000 48,0 78,0 6 700 PMXT 1550MF 1,3 PMXT 1575MF 75,0 1 130,0 201 000 29 000 31,0 78,0 6 700 271 000 155,0 80,0 60 500 17 800 1 865,0 50,0 PMXT 2050MF 2,7 3,3 69,0 PMXT 2100MF 100,0 3 729,0 362 000 60 500 160,0 17 800 17 800 PMXT 2150MF 150,0 5 650,0 421 000 60 500 87,0 285,0 4,2 CDEE AA FWFWL Catalog No./ Damping 1 1 Constant mm mm mm mm mm mm Model mm mm PMXT 1525MF -1,-2,-3 144,0 162,0 M45 x 1,5 12,7 38,0 44,5 92,0 43,5 19,0 19,0 PMXT 1550MF -1,-2,-3 195,0 213,0 M45 x 1,5 12,7 38,0 44,5 118,0 43,5 143,0 43,5 44,5 -1,-2,-3 38,0 19,0 12,7 PMXT 1575MF 246,0 264,0 M45 x 1,5 19,0 19,0 -1,-2,-3 226,0 243,0 M64 x 2,0 PMXT 2050MF 50,0 57,0 140,0 61,5 Δ PMXT 2100MF Δ -1,-2,-3 328,0 345,0 M64 x 2,0 19,0 50,0 57,0 191,0 61,5 19,0 19,0 60,0 M64 x 2,0 61,5 19,0 241,0 Δ PMXT 2150MF -1,-2,-3 456,0 473,0 60,0 Notes: 1. See page 59 for constant damping curves. 2. Urethane striker caps are available as accessories for models PM 1525MF to PM 2150MF. Δ 3. = Non-standard lead time items, contact Enidine. Email: [email protected] Tel.: +49 7621 98679-0 Fax: +49 7621 98679-29 www.enidine.eu 53

12 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 54 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Accessories PMXT 1525 CM(S) ➞ PMXT 2150 CM(S) Series Non-Adjustable Series Clevis Mount SPRING OPTIONAL LOCK RING ØT ØM ØN U CR V W Z ØS L P Q Z MN PQ Catalog No./ L +0,00/-0,25 Mass CR +0,51/-0,00 STUVW +0,00/-0,25 +0,13/-0,00 +0,13/-0,00 Model Kg mm mm mm mm mm mm mm mm mm mm mm mm 25 19,00 14,3 12,9 22 26 25 1,36 51 25,4 12,70 9,60 199 PMXT 1525 CM (S) Δ 12,70 Δ 19,00 9,60 250 PMXT 1550 CM (S) 25,4 51 25 25 26 22 1,45 14,3 12,9 22 26 25 25 51 25,4 19,00 12,70 9,60 300 PMXT 1575 CM (S) Δ 1,63 14,3 12,9 38 38 23,0 3,72 16,0 Δ 26 PMXT 2050 CM (S) 35 306 19,07 19,07 31,70 38,0 73 73 Δ 408 19,07 19,07 31,70 38,0 PMXT 2100 CM (S) 38 38 35 26 16,0 23,0 4,22 PMXT 2150 CM (S) 35 26 16,0 23,0 5,08 537 Δ 19,07 19,07 31,70 38,0 73 38 38 Notes: 1. Δ = Non-standard lead time items, contact Enidine. 2. “S” designates model is supplied with spring. Flange Foot Mount LOCK RING ØFC 4 MOUNTING HOLES FD FG FE FB Z + STROKE FJ Y + STROKE FA Bolt Kit Catalog No./ Z FA FB FC FD FE FG FJ Size Mass Y Model Part Notes mm mm mm mm mm mm mm Ref Number Model mm mm g mm 370 FM M45 x 1.5 PMXT 1500M Series 60,5 26,9 95,3 3 2F8637 M8 9,7 29,5 12,7 55,0 8,60 76,2 143,0 39,6 76,2 2000M Series PMXT 2F3010 FM M64 x 2 1,3 1 050 M10 11,2 44,5 16,0 85,6 10,40 124,0 Notes: 1. PM 2150 Z dimension is 68,3 mm 2. Shock absorber must be ordered separately from foot mount kit. 3. All foot mount kits include two foot mounts and lock ring. Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 www.enidine.eu Email: [email protected] 54

13 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 55 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Accessories PMXT 1525M ➞ PMXT 2150M Series Stop Collar (SC) ØCD LOCK RING CA (NOT INCLUDED) Non-Adjustable Series Part Model CA Catalog No./ CD Mass Model Number mm mm g Ref PMXT 1500M Series 49,0 340 56,5 8K8637 SC M45 x 1.5 Δ SC M64 x 2 x 2 M93010057 PMXT 2050M Series 89,0 76,0 936 1 191 Δ SC M64 x 2 x 4 M93011057 PMXT 2100M Series 114,0 76,0 1 475 SC M64 x 2 x 6 M93012057 PMXT 2150M Series 143,0 76,0 Δ Note: 1. Δ = Non-standard lead time items, contact Enidine. Urethane Striker Cap (USC) ØE 1 A Part Catalog No./ Model A E Mass 1 g Number Ref mm mm Model 14 44,5 24,5 PMXT 1500M C92940079 UC 2940 C93010079 UC 3010 PMXT 2000M 23 24,0 57,0 Lock Ring (LR) ØB LH Mass LH B Model Part Catalog No./ mm Ref Number g mm Model LR M45 x 1.5 F88637049 57,2 9,5 75 PMXT 1500M Series 72,9 PMXT 2000M Series 85 12,7 LR M64 x 2 F83010049 www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 55

14 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 56 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Accessories PMXT 2150M Series ➞ PMXT 1525M Non-Adjustable Series Square Flange (SF) LOCK SLOT ØFC FH SB SA Bolt Size Mass SB SA FH FC Model Part Catalog No./ mm mm mm mm Ref Number Model g mm 8,6 57,2 PMXT 1500M Series M48637129 SF M45 x 1.5 12,7 41,3 M8 140 SF M64 x 2 M10 15,7 85,1 570 M43010141 69,9 PMXT 2000M Series 10,4 Rectangular Flange (RF) LOCK SET ØFC SA SB RD FH RE Bolt RD FH FC Model Part Size Mass SB SA RE Catalog No./ mm mm mm g Model Number Ref mm mm mm mm RF M45 x 1.5 260 41,4 57,2 76,2 M58637129 PMXT 1500M Series 8,6 12,7 60,5 M8 www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 56

15 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 57 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series SPM 25M Series ➞ PMX 8M Sizing Curves PMX 8M PMX 10M Non-Adjustable Series SPM 25M PM 15M Note: Minimum impact velocity for PM models is 0,1 m/s. Email: [email protected] Tel.: +49 7621 98679-0 Fax: +49 7621 98679-29 www.enidine.eu 57

16 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 58 Non-Adjustable Series Hydraulic Shock Absorbers PM PM Series Sizing Curves PM 25M PM 100M Series ➞ Non-Adjustable Series PM 25M SPM 50M PM 100M PM 50M Note: Minimum impact velocity for PM models is 0,1 m/s. www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 58

17 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 59 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Sizing Curves ➞ PM 120/125M PMXT 1550M Series PM 120/125M PM 220/225M Non-Adjustable Series PMXT 1525M PMXT 1550M Note: Minimum impact velocity for PM models is 0,1 m/s. www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 59

18 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 60 PM Non-Adjustable Series Hydraulic Shock Absorbers XT PMXT Mid-Bore Series Sizing Curves ➞ PMXT 1575M PMXT 2150M Series Non-Adjustable Series PMXT 1575M PMXT 2050M PMXT 2150M PMXT 2100M Note: Minimum impact velocity for PM models is 0,1 m/s. Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] www.enidine.eu 60

19 A4-Metric:Project1-A4-Metric 11/5/09 3:55 PM Page 61 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Technical Data PRO 100M Series ➞ PRO 15M Standard D ø D ø * G ø E ø G ø 1 J WL C J WL C WF H WF H F F A * A 1 y. *Note: A apply to button models and urethane striker cap accessor and E 1 1 PRO 50M x 50M Series C ø D Non-Adjustable Series * E ø ø G 1 WL WF H F A 1 PRO 100M x 80M Series C D ø ø E * G ø 1 WF H WL F A 1 Nominal Coil F F P D Spring Force SE E C Max. Max. T T Catalog No./ action Stroke Max. Max. Re Mass Extended Co mpressed Propelling Model N Nm/c Nm/hr Force N mm N Force N g PRO 15M (B) 10,4 3,0 28 200 2 000 7,0 220 56 10,0 11,0 34 000 26,0 16,0 PRO 25MF (B) 530 68 2 800 4,5 26,0 34 000 2 800 4,5 11,0 530 68 PRO 25MC (B) 16,0 22,0 54,0 53 700 3 750 PRO 50MC (B) 30,0 890 136 8,9 PRO 50MC x 50 50 74,0 34 600 3 336 8,9 21 890 390 25,0 PRO 100MF (B) 297 90,0 70 000 5 500 13,0 27,0 1 550 25,0 90,0 70 000 5 500 13,0 27,0 1 550 297 PRO 100MC (B) PRO 100MC x 80 48 570 20 6 672 86 000 260 1 550 80 Catalog No./ H G A A Damping F CDE J WF WL 1 1 Model mm Constant mm mm mm mm mm mm mm mm mm -1 PRO 15M (B) 9,9 72,4 M12 x 1,0 3,0 10,2 6,9 2,5 11,0 9,5 52,1 ,-2,-3 62,2 7,6 107,2 4,0 11,2 81,3 10,9 M14 x 1,0 1,0 12,0 12,7 -1,-2,-3 PRO 25MF (B) 97,5 97,5 107,2 M14 x 1,5 4,0 11,2 81,3 10,9 PRO 25MC (B) 7,6 1,0 12,0 12,7 -1,-2,-3 7,6 95,5 12,7 4,8 M20 x 1,5 130,3 16,3 -1,-2,-3 PRO 50MC (B) 1,0 18,0 12,7 118,4 17 6 M20 x 1,5 225 – 10,0 PRO 50MC x 50 18,0 – 12,0 18,0 162 -1,-2,-3 PRO 100MF (B) 128,8 141,5 M25 x 1,5 6,4 15,7 102,6 22,2 12,7 4,6 23,0 12,7 -1,-2,-3 102,6 -1,-2,-3 141,5 M25 x 2,0 6,4 15,7 128,8 22,0 12,7 4,6 23,0 12,7 PRO 100MC (B) 242 20 8 M27 x 3,0 335 – -1,-2,-3 PRO 100MC x 80 22,5 10 22 – 143 Notes: 1. See page 66 for constant damping curves. 2. (B) indicates button model of shock absorber . 3. Buttons cannot be added to non-button models or removed from button models. Email: [email protected] Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 www.enidine.eu 61

20 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 62 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Accessories PRO 15M PRO 100M Series ➞ Non-Adjustable Series Stop Collar (SC) WF ØCD WL HEX JAM NUT (NOT INCLUDED) CA CD CA Model Part Catalog No./ WF WL Mass mm Model mm g Number Ref mm mm 19,0 M930289171 PRO 15M (B) SC M12 x 1 14 9,0 Δ 14,0 16,0 20 12,0 17,0 18,0 25,4 Δ SC M14 x 1 M930286171 PRO 25MF (B) SC M14 x1.5 38 12,0 19,0 21,0 M930281171 PRO 25MC (B) Δ 25,4 M930282171 PRO 50MC (B) 22,0 25,0 38,0 SC M20 x 1.5 Δ 12,0 63 215 SC M25 x 1.5 M930284171 PRO 100MF (B) 44,5 38,0 32,0 15,0 Δ = Non-standard lead time items, contact Enidine.. Δ Note: 1. Jam Nut (JN) JA JB JH Part Mass JB JA Model Catalog No./ JH mm g mm Number Model mm Ref 2 4,0 15,0 17,3 PRO 15MF (B) J25588035 JN M12 x 1 17,0 19,7 PRO 25MC (B) J23935035 JN M14 x 1.5 3 4,0 3 4,0 17,0 19,7 JN M14 x 1 J24950035 PRO 25MF (B) 27,7 4,6 24,0 PRO 50MC (B) J22646035 JN M20 x 1.5 9 15 JN M25 x 1.5 J23004167 37,0 32,0 4,6 PRO 100MF (B) Side Load Adaptor (SLA) E WF ØS C ØD WL HEX JAM NUT B STROKE A (NOT INCLUDED) Catalog No./ Part Model Stroke A B C D E S WF WL mm Model Ref mm mm Number mm mm mm mm mm 14,0 32,4 6,0 M12 x 1 7,0 13,0 SLA 12MF SLA 33299 PRO 15MF (B) 10,0 18 14 13 7,0 SLA 33297 PRO 25MF (B) 16,0 26 SLA 14MF M14 x 1 8,0 45,2 18,0 15,0 Δ 7,0 SLA 14MC SLA 33298 PRO 25MC (B) 16,0 26 13 M14 x 1,5 8,0 45,2 18,0 15,0 22,0 7,0 22,0 25,0 32 SLA 20MC SLA 33302 PRO 50MC (B) 62 11,0 17 M20 x 1,5 30 36,0 SLA 33263 PRO 100MF (B) 25,4 38 SLA 25MF M25 x 1,5 15,0 73,2 32,0 7,0 73,2 10,0 15,0 32,0 36,0 SLA 27MC SLA 33296 PRO 100MC (B) 25,4 38 30 M27 x 3 Notes: 1. Maximum sideload angle is 30° 2. Do Not use with button models. 3. Δ = Non-standard lead time items, contact Enidine. www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 62

21 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 63 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Technical Data PRO 225M Series ➞ PRO 110M Standard ØD ØE * ØE 1 C J WL WF F A * A 1 and E apply to button models and urethane striker cap accessory. *Note: A 1 1 Non-Adjustable Series Nominal Coil F F D P Spring Force Max. SE Max. E C T T Catalog No./ Extended Co Stroke Max. Max. Re action mpressed Propelling Mass g mm Nm/c Nm/hr Force N N N Force N Model 2 220 454 PRO 110MF (B) 40,0 190,0 75 700 7 500 18,0 49,0 454 190,0 75 700 7 500 18,0 49,0 2 220 PRO 110MC (B) 40,0 25,0 PRO 120MF 160,0 75 700 11 120 56,0 89,0 2 220 482 2 220 89,0 56,0 11 120 87 500 160,0 25,0 PRO 125MF 482 PRO 220MF 737 2 220 89,0 31,0 11 120 90 300 310,0 50,0 PRO 225MF 89,0 31,0 11 120 111 000 737 310,0 50,0 2 220 Note: See page 68 for constant damping curves. CDEE F A A Damping Catalog No./ J WF WL 1 1 mm mm mm mm Model mm mm Constant mm mm mm 201,4 – – 1,5 -1, -2, -3 127,0 PRO 110MF (B) 22,2 22,2 8,0 204,7 M25 x 1,5 22,2 PRO 110MC (B) 204,7 M25 x 2,0 8,0 22,2 201,4 127,0 1,5 – – -1, -2, -3 9,5 PRO 120MF -1, -2, -3 140,2 145,3 M33 x 1,5 29,0 30,5 87,0 5,3 30,0 16,0 Δ PRO 125MF 16,0 33,0 5,3 87,0 30,5 29,0 145,3 M36 x 1,5 9,5 140,2 -1, -2, -3 5,3 16,0 30,0 128,0 30,5 29,0 Δ PRO 220MF -1, -2, -3 207,0 212,0 M33 x 1,5 9,5 212,0 M36 x 1,5 9,5 128,0 5,3 PRO 225MF -1, -2, -3 207,0 33,0 29,0 16,0 30,5 Notes: 1. Δ = Non-standard lead time items, contact Enidine. 2. Urethane striker caps are available as accessories. 3. (B) indicates button model of shock absorber. Urethane Striker Cap (USC) ØE A Part Catalog No./ Model A E Mass 1 Ref Model Number mm mm g UC 5568 PRO 110M 10,0 22,0 3 C95568079 30,5 UC 8609 3 PRO 120,125, 220 & 225M 10,0 C98609079 Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] www.enidine.eu 63

22 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 64 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Accessories PRO 225 CM(S) Series ➞ PRO 110 CM(S) Non-Adjustable Series Clevis Mount JAM NUT SPRING OPTIONAL ØS ØU ØM ØN CR X V P Q W L MN PQ L Catalog No./ V +0,13/-0,00 +0,00/-0,25 +0,13/-0,00 U +0,00/-0,25 W X CR Mass S Model Kg mm mm mm mm mm mm mm mm mm mm mm 8,00 7,0 PRO 110 CM (S) 211 5,00 5,00 8,00 Δ 28 22 11 13 5,0 0,54 0,59 11,2 Δ PRO 120 CM (S) 167 6,38 6,38 12,70 12,70 38 23 6 12 6,1 12,70 6,38 0,73 6 11,2 6,0 24 22 6,38 180 PRO 125 CM (S) Δ 38 12,70 6,38 6 0,77 11,2 6,1 12 23 38 12,70 12,70 6,38 234 Δ PRO 220 CM (S) 24 6,38 12,70 12,70 38 22 6 230 PRO 225 CM (S) 6,0 11,2 0,86 Δ 6,38 Notes: 1. “S” designates model is supplied with spring. 2. = Non-standard lead time items, contact Enidine. Δ Flange Foot Mount ØFC FD FG FE FB FJ FK FA Z + STROKE Y + STROKE Bolt Kit FE Mass Notes Catalog No./ Part Model Y Z FA FB FC FD Size FG FJ FK mm Model Ref mm mm mm mm mm Number mm mm mm mm mm g 45,0 FM 33 x 1.5 2F21049306 PRO 120/220M 57,2 31,8 70,0 60,3 5,90 12,7 22,7 6,4 22,2 M5 100 2 12,7 FM 36 x 1.5 PRO 125/225M 57,2 31,8 70,0 60,3 5,90 45,0 2F21293306 22,7 6,4 22,2 M5 100 1,2 Notes: 1. Shock absorber must be ordered separately from foot mount kit. 2. All foot mount kits include two foot mounts. Tel.: +49 7621 98679-0 Email: [email protected] www.enidine.eu Fax: +49 7621 98679-29 64

23 A4-Metric:Project1-A4-Metric 4/10/08 8:41 AM Page 65 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Accessories ➞ PRO 110M PRO 225M Series Stop Collar (SC) WF ØCD WL HEX JAM NUT (NOT INCLUDED) CA Catalog No./ Mass WL WF CD CA Model Part Non-Adjustable Series mm g mm mm mm Ref Number Model SC M25 x 1.5 x 40 M931291171 15,0 32,0 38,0 50,0 PRO 110MF 215 M930284171 15,0 32,0 38,0 44,5 215 PRO 110MC SC M25 x 1.5 41,0 PRO 120/220MF M930290171 SC M33 x 1.5 36,0 17,0 210 38,0 41,0 SC M36 x 1.5 M930285171 210 18,0 PRO 125/225MF 38,0 63,5 Jam Nut (JN) JA JB JH JB Part Mass JH JA Model Catalog No./ Model mm g mm mm Ref Number J23004167 JN 25 x 1.5 32,0 PRO 110MF 37,0 4,6 15 37,0 32,0 4,6 PRO 110MC J25568035 15 JN 25 x 2 27 6,4 38,0 PRO 120/220MF J28609035 JN 33 x 1.5 43,8 47,3 41,0 27 JN 36 x 1.5 6,4 J23164035 PRO 125/225MF Universal Retaining Flange (UF) K I Ø5,5 A F B Ø8,0 E J D Ø5,5 G C Catalog No./ Part Model A B C D E F G I J K M mm mm odel Number Ref mm mm mm mm mm mm mm mm PRO 110 MF M25 x 1,5 UF M25 x 1.5* U13004143 48 16,0 8,0 6.5 35,0 35,0 4,75 10,0 25,5 UF M25 x 2* U15568143 PRO 110 MC M25 x 2 Note: 1.*Please use special jam nuts only. 2. All dimensions in millimeters. Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] www.enidine.eu 65

24 A4-Metric:Project1-A4-Metric 2/13/08 9:01 AM Page 66 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Series Sizing Curves PRO 15M ➞ PRO 50M Series Non-Adjustable Series PRO 15M PRO 25M PRO 50M www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 66

25 A4-Metric:Project1-A4-Metric 2/13/08 9:02 AM Page 67 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Sizing Curves PRO 50M x 50 ➞ PRO 100M x 80 Series PRO 50M x 50 Non-Adjustable Series PRO 100M PRO 100M x 80 Email: [email protected] www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 67

26 A4-Metric:Project1-A4-Metric 2/13/08 9:02 AM Page 68 Non-Adjustable Series Hydraulic Shock Absorbers PRO PRO Small-Bore Series Sizing Curves PRO 110M ➞ PRO 225M Series Non-Adjustable Series PR0 110M PRO 125M PRO 225M www.enidine.eu Fax: +49 7621 98679-29 Tel.: +49 7621 98679-0 Email: [email protected] 68

Related documents

Gutmans Frontmatter

Gutmans Frontmatter

Gutmans_Frontmatter Page i Thursday, September 23, 2004 9:05 AM PHP 5 Power Programming

More info »
How to Think Like a Computer Scientist — How to Think Like a Computer Scientist: Learning with Python 3

How to Think Like a Computer Scientist — How to Think Like a Computer Scientist: Learning with Python 3

How to Think Like a Computer Scientist — How to Think Like a Computer Scientist: Learning with Python 3 index | How to Think Like a Computer Scientist: Learning with Python 3 » next How to Think Like ...

More info »
Hubbell Trading Post NHS: An Administrative History

Hubbell Trading Post NHS: An Administrative History

Hubbell Trading Post NHS: An Administrative History Hubbell Trading Post Administrative History Hubbell Trading Post National Historic Site An Administrative History Albert Manchester and Ann Manchest...

More info »
The 9/11 Commission Report

The 9/11 Commission Report

Final FM.1pp 7/17/04 5:25 PM Page i THE 9/11 COMMISSION REPORT

More info »
CircuitPro PM 2.1

CircuitPro PM 2.1

CircuitPro PM 2.1 How-to guides Order Code: 999 999

More info »
544 41003 ch00 4P.indd

544 41003 ch00 4P.indd

Life as Politics Bayat.indd 1 24-12-2009 13:59:53

More info »
Redbook 2009

Redbook 2009

What Every Special Educator Must Know Ethics, Standards, and Guidelines Sixth Edition 2 0 0 9 R e v i s e d E n oun i C C il for E x CE ptional C hildr redbook FM_46_4th_EDIT_0918cw re1 1 9/18/2009 3:...

More info »
201612 final integrated review plan

201612 final integrated review plan

Integrated Review Plan for the National Ambient Air Quality Standards for Particulate Matter

More info »
Preliminary cloth.indd

Preliminary cloth.indd

U.S. Government Printing Offi ce Style Manual An official guide to the form and style of Federal Government printing 2008 Preliminary-CD.indd i Preliminary-CD.indd i 3/4/09 10:18:04 AM 3/4/09 10:18:04...

More info »
Will to Fight: Analyzing, Modeling, and Simulating the Will to Fight of Military Units

Will to Fight: Analyzing, Modeling, and Simulating the Will to Fight of Military Units

R N O I T A C O R P O WILL to FIGHT Analyzing, Modeling, and Simulating the Will to Fight of Military Units Ben Connable, Michael J. McNerney, William Marcellino, Aaron Frank, Henry Hargrove, Marek N....

More info »
policyandchoice book

policyandchoice book

a dvance Praise F or Congdon • Kling Mullai hoice and c Policy “Policy and Choice is a must-read for students of public finance. If you want to learn N William J. Congdon is a research director in Tra...

More info »
Eli Hertz Reply 11 6 05c

Eli Hertz Reply 11 6 05c

R Even the most sacred precepts of international law can be manipulated to e pervert the truth. In its Advisory Opinion of 9 July 2004, the UN's Interna - p l tional Court of Justice ruled that Israel...

More info »
911 Call Logs   2017 Updated

911 Call Logs 2017 Updated

Fire and EMS 24 Hour Call Report 2019-04-10 through 2019-05-09 Address Problem City Call Date Call Time Incident Number 2019-05-09 < 100 block of HOSPITAL DR 5/9/2019 12:34:40 AM 37A02 Level I Transfe...

More info »
AffordableExcellencePDF

AffordableExcellencePDF

HASE LTINE This is the story of the Singapore healthcare system: how it works, how it is financed, its history, where it is going, and AFFORDABLE EXC what lessons it may hold for national health syste...

More info »
forum answered questions

forum answered questions

® Tech Challenge FIRST 2018 2019 - Forum Answered Questions

More info »
ez pmi revj 2

ez pmi revj 2

® EZ-ZONE PM User’s Manual Integrated Controller Models TA TO L S CU T O M ER N A S A CT O I F TIS arranty W Y 3 ear ISO 9001 Registered Company 1241 Bundy Boulevard., Winona, Minnesota USA 55987 Wino...

More info »
SR288.PS

SR288.PS

113th Congress S. Report ! " SENATE 2d Session 113–288 REPORT of the SENATE SELECT COMMITTEE ON INTELLIGENCE COMMITTEE STUDY of the CENTRAL INTELLIGENCE AGENCY’S DETENTION AND INTERROGATION PROGRAM to...

More info »