14 20 AM AFF RP.qxd

Transcript

1 W ater Separator/Oil Mist Separators/ Odor Removal Filter Series AM  Moisture Outlet side eliminating Series Smell Filtration density of oil mist Page degree Water separator Eliminates water droplets in the Series — Oil smell — 99% 14-20-3 compressed air. AMG Water Separator 3 μ m Main line filter (95% capture of Series Eliminates impure particles such — 14-20-9 the particle diameter) AFF as oil and foreign objects, etc. in Note) compressed air. Degree of quality 3 Mist separator 0.3 μ m 3 Eliminates oil mist in compressed (ANR) 1 mg/m (95% capture of Series air or rust sized 0.3 m or more, μ ( 0.8 ppm) ≅ 14-20-16 the particle diameter) AM and solid foreign objects such as Note) Degree of quality 3 Degree of quality 2 carbon. Oil smell Micro mist separator m μ 0.01 Eliminates foreign particles sized (95% capture of Series 0.01 μ m or more, or oil particles 14-20-22 the particle diameter) AMD in aerosol state. 3 (ANR) 0.1 mg/m Degree of quality 1 ≅ 0.08 ppm) ( Micro mist separator — with prefilter Oil Mist Separators m μ 0.3 + 0.01 Degree of quality 2 It's an oil separator, which (95% capture of Series 14-20-30 incorporates prefilter (equivalent the particle diameter) AMH to AM) into micro mist separator. Degree of quality 1 Super mist separator Captures foreign particles sized 3 (ANR) 0.01 mg/m μ 0.01 m or more and suction oil Series ( 0.008 ppm) ≅ Some oil odor 14-20-37 particles in an aerosol state. AME μ 0.01 m Degree of quality 1 (95% capture of the particle diameter) Odor removal filter Degree of quality 1 3 0.04 mg/m (ANR) Eliminates odor from compressed Series Non oil odor ( 0.0032 ppm) ≅ 14-20-42 air. AMF Degree of quality 1 Deodorizer With pressure differential gauge, With pressure differential gauge With IN-OUT flange HA  HA  , s possible to control prod- It IN-OUT Flange Connection with the , s life cycles by watching uct Connection of the flange piping and flange piping is possi- AT AT the degree of a clogging ele- confirming a clogged element is ble. ment. possible. Made to Order 14-20-55 Auto-drain type, drain guide Medium pressure spec-  ID  ID White vaseline specifications specifications ifications Using white Vaseline for the lu- With auto-drain, drain piping is Max. operating pressure bricant. possible. 1.4 MPa AMG AMG Clean Series Copper-free AFF AFF Usable inside clean room. Eliminates the effect of copper ion or fluoric resin, etc. Special Specifications 14-20-58 for a color CRT.   AM AM Misc. Misc. 14-20-59 How to Order Bowl Assembly 14-20-62 Precautions 14-20-64 Information on Items to be Discontinued and Equivalent Products Auto-Drain Valve, Motor Operated Auto-drain, Heavy Duty Auto-Drain, Pressure Differential Gauge 14-20-49 Related Products and JIS B 8392-1: 1991 2000 . Note) It describes the degree of compressed air quality based on ISO8573-1: 14-20-1

2 14-20-2

3 Please refer to page 14-20-62 for specific product precautions. ater Separator W Series AMG The AMG series water separator is Model installed on the air pressure line to Model AMG250 AMG150 AMG650 AMG350 AMG550 AMG450 AMG850 Note) remove water drops in the 2200 6000 1500 3500 750 12000 300 /min (ANR)) l Rated flow ( compressed air. It is suitable for size Por t 3 3 3 3 1 3 1 3 1 1 1 1 1 1 1 1 1 12 1 , ,, , , ,, ,, ,, 2 8 8 2 4 2 2 8 4 8 2 4 4 4 use in cases where “water must be (Nominal size B) removed, but the air does not have eight (kg) W 1.4 0.9 0.55 0.38 4.2 10.5 2.1 to be as dry as when an air dryer is Note) Max. flow capacity at a pressure of 0.7 MPa. used” or “an air dryer cannot be Max. flow varies depending on operating pressure. Refer to page 14-20-4 for flow rate and used because an electric power page 14-20-4 for the max. flow line graph. supply is not available”. Specifications Through the adoption of an element Compressed air Fluid that is used exclusively for removing 1.0 MPa Max. operating pressure ∗ water drops and the provision of ample 0.05 MPa Min. operating pressure ∗ housing interior space, a 99% water 1.5 MPa Proof pressure ∗∗ has been achieved. removal rate 5 to 60 ° C Ambient and fluid temperature 99% Removed rate of water Caution 2 years or when pressure drop reaches 0.1 MPa Element life 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) in the case of types with auto-drain. ∗ W ater separator can remove water droplets, but it cannot remove moisture. Refer to “Made to Order Specifications” on page 14-20-55. Condition of inlet air ∗ Pressure: 0.7 MPa T emperature: 25 ° C Accessory (Option) Relative humidity: 100% Liquid water content (Water droplet content): Applicable model AMG150 AMG250 AMG350 AMG450 AMG550 AMG650 AMG850 3 1.5 g/m (ANR) Bracket assembly Compressed air flow: Rated flow of each model With cap bolt and BM57 BM56 BM55 BM51 BM54 BM53 BM52 Removed rate of water (%) = ∗∗ spring washer Removed water (Water droplet) (g) x 100 How to Order Inflowed water (Water droplet) (g) arious equipment for drain discharge V 250 03 AMG J B ∗ Option Body size B 1 150 Standard female thread Drain guide 1/4 J 8 HA  1 250 Standard IN-OUT reversal direction R 4 3 Note) Element service indicator 350 Standard 8 AT (symbol: T) is not available 1 Standard 450 2 as an option because water 3 550 Standard 4 deposits inside the indicator  ID 650 1 Standard will lead to malfunctions. 1 ∗ Standard 1 850 2 Accessory (Option) AMG Description Symbol Thread type Nil — Rc Nil B Bracket JIS Symbol AFF G F C N.C. auto-drain AMG NPT N D N.O. auto-drain  AM ∗ Refer to the table below for Port size accessory/Option combinations. B B 1 3 06 01 8 4 Made to Order Specifications Misc. B B 1 02 1 10 4 (For details, refer to page 14-20-55.) Note) Refer to “How to Order Bowl Assembly” B B 3 1 1 14 03 2 8 on page 14-20-59. B B 1 20 2 04 2 Caution Depends on model  Available Not available Accessory/Option Combinations Be sure to read before handling. Option Accessory Applicable model specifications Refer to pages 14-21-3 to 4 for Safety Accessory (Option) AMG150 AMG450 C AMG350 AMG250 AMG550 AMG650 AMG850 DJR Instructions and Common Precautions on C N.C. auto-drain the products mentioned in this catalog, Accessory D N.O. auto-drain pages 14-14-6 to 8 for Precautions on 1 -J Drain guide B 4 Option ev ery series, and pages 14-20-62 to 64 for IN-OUT reversal direction -R more detailed precautions on every series. 14-20-3

4 Series AMG Element initial condition Flow Characteristics Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. 1 B B B 2 1 1 AMG150 AMG850 AMG450 1 2 8 Max. flow line Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) l /min (ANR)) Air flow rate ( Air flow rate ( l /min (ANR)) Air flow rate ( /min (ANR)) l B B 1 3 AMG550 AMG250 4 4 M ax. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) l Air flow rate ( /min (ANR)) Air flow rate ( /min (ANR)) l BB 3 1 8 AMG350 AMG650 Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) l Air flow rate ( l Air flow rate ( /min (ANR)) /min (ANR)) 14-20-4

5 W ater Separator Series AMG Construction AMG850 AMG150 to AMG650 Component Parts Note) Refer to page 14-20-59 for “How to Order Bowl Assembly”. No. Material Note Description q Body Aluminum die-casted Chrome treated Epoxy coating on inner surface ∗ Note) Sight glass is indicated in the figure above for easy w Housing Aluminum die-casted understanding of parts, however mounting position is e Sight glass T empered glass different. Refer to dimensions on pages 14-20-6 to 7 for details. ∗ AMG850 is aluminum casted. Replacement Parts Model No. Material Description Replacement Parts AMG450 AMG350 AMG850 AMG650 AMG550 AMG250 AMG150 Resin Element r AMG-EL350 AMG-EL850 AMG-EL550 AMG-EL250 AMG-EL650 AMG-EL450 AMG-EL150 Others assembly ∗ Element assembly: With gasket and O-ring Max. Air Flow Model Selection Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6 MPa 3 HA  Maximum air flow rate: 5 m /min (ANR) Select the point of contact A of inlet pressure and max. air capacity . 1 in the graph. AT AMG650 is obtained when the max. flow line is above the point of . 2 intersection A in the graph. ID  /min (ANR)) 3 Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting point. AMG With a model that has the maximum flow rate line below the obtained intersecting point, the flow rate will AFF be exceeded, thus leading to a problem such as being unable to satisfy the specifications. AM  Max. air flow rate (m Misc. Inlet pressure (MPa) 14-20-5

6 Series AMG Dimensions AMG150 to AMG650 Accessory D: With auto-drain (N.O.) Drain cock: Black One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray One-touch fitting ∗ N.C. auto-drain not available for AMG650. Option J: With drain guide Bracket (Option) female thread Drain space Maintenance Dimensions with mounting bracket Port size F G A E B D C Model (Nominal size B) J P Q M K H N O L S R I 1 1 3 1.6 9 26 56 5 4.5 70 35 166 15 5.5 54 100 20 13 63 63 159 10 AMG150 , , 4 8 8 1 3 2.0 20 66 84 12 66 28 8 40 5 187 6 13 113 172 76 20 76 10 , 8 4 AMG250 1 187 28 40 5 2.0 66 6 17 66 12 84 8 20 76 119 178 16 10 76 2 1 3 , 80 34 14 2.3 80 8 22 50 218 5 7 100 90 145 16 20 10 204 90 2 8 AMG350 3 7 50 218 80 5 34 19 80 2.3 14 100 8 90 90 210 20 10 151 19 4 3 1 , 10 90 241 110 9 88 50 14 55 3.2 25 9 19 166 225 106 106 10 20 4 2 AMG450 88 50 110 90 14 9 21 241 10 55 3.2 9 106 106 22 173 232 10 20 1 3 AMG550 , 10 102 10 30 60 100 65 277 4.5 130 9 16 122 200 10 22 122 20 259 1 4 1 AMG650 11 , 12 40 150 334 15 20 11 4.5 85 76 136 180 32 10 160 253 20 311 160 2 14-20-6

7 AMG W ater Separator Series Dimensions AMG850 Accessory D: With auto-drain (N.O. type) or AMG850 f f emale thread Bracket (Option) HA  AT  ID AMG Drain 3/8B female thread Maintenance space AFF AM  Misc. Dimensions with mounting bracket Port size A C E D F B G Model (Nominal size B) O K P M Q R I N S H L J 1 184 30 110 220 18 120 6.0 24 15 180 13 460.5 463.5 220 42 57.5 220 10 348 AMG850 , 2 2 14-20-7

8 14-20-8

9 Please refer to pages 14-20-62 to 64 for specific product precautions. Main Line Filter Series AFF Specifications Compressed air Fluid Series AFF is mounted to 1.0 MPa Max. operating pressure main piping to remove ∗ 0.05 MPa Min. operating pressure 1.5 MPa Proof pressure impurities like oil, water C 5 to 60 ° Ambient and fluid temperature and foreign matter in 3 μ m (95% particle size collection) Filtration degree compressed air. It improves 2 years (1 year for A type) or when pressure drop reaches 0.1 MPa Element life 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) in the case of types with auto-drain. ∗ the function of downward Refer to “Made to Order Specifications” on pages 14-20-55 to 14-20-57. dryer, extends the life of precision filter, and prevents trouble with the Accessory (Option)/For AFF2B to AFF75B Applicable model AFF22B AFF37B AFF75B AFF11B AFF8B AFF4B AFF2B equipment. Bracket assembly With cap bolt and BM54 BM51 BM52 BM53 BM55 BM56 BM57 spring washer Accessory (Option)/For AFF75A to AFF220A Applicable model AFF125A AFF75A AFF220A AFF150A Auto drain (2 pcs. each) AD402-03-2 Pressure gauge (2 pcs. each) G46-15-02 B K B K K B Companion flange (2 pcs. each) 2 FF 3 JIS 10 FF 4 JIS 10 JIS 10 FF Anchor bolt (3 pcs. each) AI-2S Model Model AFF11B AFF22B AFF37B AFF75B AFF75A AFF2B AFF4B AFF8B AFF125A AFF150A AFF220A Note) Rated flow 300 12000 12000 6000 3500 2200 1500 22000 28000 42000 750 ( l /min (ANR)) B B B B A  AFF B AFF  1 3 1 3 1 1 1 3 ,, ,, ,, ,, Port size 3 4 4 2 8 2 4 4 4 8 2 8 1 3 1 1 1 2 1 1 , , , 2 4 2 (Nominal size B) 3 3 1 flange flange flange flange 1 4 2 8 0.38 2.1 0.9 0.55 10.5 1.4 50 87 4.2 52 72 W eight (kg) JIS Symbol Note) Max. flow is at 0.7 MPa. Max. flow varies depending on operating pressure. AFF Refer to page 14-20-11 for flow characteristics and the graph below for max. air flow.  HA Max. flow line Model Selection Max. Air Flow AT Select the model in accordance with the following procedure taking the inlet pressure and max. air P. 14-20-55 ID  flow into consideration. (Example) Inlet pressure: 0.6 MPa 3 Max. air flow capacity: 5 m /min (ANR) AMG Select the point of contact A of inlet pressure 1. and max. air capacity in the graph. AFF select one with the maximum air flow rate 2. To /min (ANR)) 3 line that is located above the obtained intersection point A, the model will be AFF37B. Caution AM  Note) Make sure to select a model that has Be sure to read before handling. the maximum flow rate line above the Misc. Refer to pages 14-21-3 to 4 for obtained intersecting point. With a Safety Instructions and Common model that has the maximum flow rate line below the obtained intersecting Precautions on the products Max. air flow rate (m point, the flow rate will be exceeded, mentioned in this catalog, pages thus leading to a problem such as 14-14-6 to 8 for Precautions on being unable to satisfy the every series, and pages 14-20-62 specifications. Inlet pressure (MPa) to 64 for more detailed precautions on every series. 14-20-9

10 Series AFF How to Order AFF2B to AFF75B 8B 03 AFF B J ∗ Option Body size B 1 Drain guide female thread J 4 1 Standard 2B 8 IN-OUT reversal direction R ∗ 1 Accessory (Option) 4B Standard 4 Element service indicator T 3 8B Standard Symbol 8 Description 1 Standard 11B 2 Nil — 3 22B Standard 4 B Bracket 37B 1 Standard C N.C. auto-drain 1 75B Standard 1 2 D N.O. auto-drain Refer to the table below for ∗ Note) Refer to page 14-20-59 for “How to Thread type accessory/option combinations. Order Bowl Assembly”. Rc Nil G F Accessory/Option Combinations  Available Not available Depends on model N NPT Optional Applicable model Accessory specification Accessory (Option) AFF4B C AFF2B R AFF8B AFF11B AFF22B AFF37B AFF75B DJ T size Port C N.C. auto-drain B B 1 3 01 06 Accessory 8 4 D N.O. auto-drain B B 1 02 1 10 4 1 -J Drain guide B 4 B B 3 1 03 14 1 2 8 -R IN-OUT reversal direction Option B B 1 20 2 04 2 -T Element service indicator AFF75A to AFF220A 75A 20 AFF D Accessory (Option) Basic size A uto-drain D (Applicable compressor Pressure gauge G rating) Companion flange F 75A 75 kW Anchor bolt L 110 to 125 kW 125A 150 kW 150A Port size 220A 180 to 220 kW B 20 2 JIS 10k flange B JIS 10k flange 3 30 B JIS 10k flange 4 40 14-20-10

11 Main Line Filter Series AFF Element oil saturation Flow Characteristics /Select the model taking the max. flow capacity into consideration. to the element. Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage B BB 1 3 2 AFF2B AFF22B AFF75A 4 8 Max. flow line 0.1 MPa 0.1 MPa Max. flow line Max. flow line 0.3 MPa Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate ( /min (ANR)) /min (ANR)) l Air flow rate ( /min (ANR)) l Air flow rate (m BBB 3 1 AFF125A AFF4B AFF37B 1 4 Max. flow line 0.1 MPa 0.3 MPa Max. flow line Max. flow line 0.1 MPa Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate (m /min (ANR)) l /min (ANR)) /min (ANR)) l Air flow rate ( Air flow rate ( B B B 1 3 1 AFF75B AFF8B AFF150A 2 4 8 Pa Pa Max. flow line 0.1 M Max. flow line 0.1 M 0.3 MPa Max. flow line HA  AT Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) ID  3 3 Air flow rate (m Air flow rate (m l /min (ANR)) /min (ANR)) Air flow rate ( /min (ANR)) AMG B B 1 4 AFF220A AFF11B 2 AFF Max. flow line  AM 0.1 MPa Max. flow line Misc. 0.3 MPa Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate (m Air flow rate ( l /min (ANR)) /min (ANR)) 14-20-11

12 AFF Series Construction AFF2B to AFF37B AFF75B Component Parts Note) Refer to page 14-20-59 for “How to Order Bowl No. Note Material Description Assembly”. q Body Aluminum die-casted Chrome treated ∗ Epoxy coating on inner surface w Housing Aluminum die-casted Note: Sight glass is indicated in the figure above for easy e Sight glass Tempered glass understanding of parts, however mounting position is different. Please refer to pages 14-20-13 to 14-20-14 ∗ AFF75B is aluminum casted. Replacement Parts or details. f Model No. Material Description AFF22B AFF11B AFF75B AFF4B AFF37B AFF8B AFF2B Element Cotton paper, r AFF-EL37B AFF-EL75B AFF-EL22B AFF-EL4B AFF-EL8B AFF-EL11B AFF-EL2B assembly Others ∗ Element assembly: With gasket and O-ring AFF75A to 220A (OUT side) Guage port N-5 Drain N-4 N-6 Gauge port (IN side) Component Parts No. Note Material Description q Case SGP-E, SS400 w Cover SS400 Replacement Parts Drain (N-3) Model Material No. Description AFF75A AFF150A AFF125A AFF220A EC800-003N EC700-003N EC900-003N e Element AL-34S AL-33S AL-35S NBR r Packing 14-20-12

13 Main Line Filter Series AFF Dimensions AFF2B to AFF37B Accessory D: With auto-drain (N.O.) Drain cock: Black ø10 One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray ø10 One-touch fitting ∗ N.C. auto-drain not available for AFF37B. Option J: With drain guide Bracket (Option) B male thread fe 1/4 With element service indicator T: Drain  HA Maintenance space AT ID  AMG Element service AFF Dimensions with mounting bracket Port size indicator C B D F A E G Model (Nominal size B) K L N I O P Q U R S J M T H  AM 3 1 1 166 35 56 37 9 54 5.5 70 5 24 26 4.5 15 1.6 63 100 159 20 13 63 10 AFF2B , , 8 4 8 1 3 187 8 66 12 5 40 6 37 66 27 2.0 84 20 28 76 76 20 172 113 10 13 , 8 4 AFF4B 1 Misc. 187 6 5 2.0 27 17 12 37 84 40 28 66 8 66 10 20 178 16 76 119 76 2 1 3 , 218 80 14 100 50 37 5 32 8 22 34 7 80 2.3 145 90 204 10 16 90 20 2 8 AFF8B 3 218 5 7 19 37 2.3 14 100 50 80 8 34 80 32 90 10 151 19 20 210 90 4 1 3 , 241 50 25 110 88 9 3.2 14 37 90 37 55 9 10 225 106 10 166 20 106 19 4 2 AFF11B 241 9 21 110 55 3.2 10 50 37 9 88 14 37 90 22 10 106 173 232 106 20 1 3 AFF22B , 277 10 30 102 39 100 10 65 9 37 130 16 60 4.5 259 200 22 20 122 10 122 1 4 1 AFF37B 11 , 334 55 20 180 150 76 11 37 136 12 4.5 85 15 40 253 20 311 160 160 32 10 2 14-20-13

14 Series AFF Dimensions AFF75B Accessory D: With auto-drain (N.O.) or AFF75B f B 3/8 f emale thread Option Bracket (Option) With element service indicator T: Drain f emale thread space Maintenance Dimensions with mounting bracket Port size F E C D G A B Model (Nominal size B) H M J S N K O I P L Q R 1 13 463.5 460.5 42 348 220 57.5 220 10 184 6.0 18 180 30 15 110 120 220 24 AFF75B ,2 1 2 AFF75A to AFF220A/Dimensions 3-ø20 holes or anchor F bolt mounting Label Drain Rc ORIENTATION øA G D Model C B E F Port size B 2BJIS10k flange AFF75A 505 265 1125 184 380 8 935 Drain Rc 3/8 B 3BJIS10k flange AFF125A 265 935 380 505 1125 8 184 N3 B 4BJIS10k flange AFF150A 540 236 265 1178 450 980 10 B 4BJIS10k flange AFF220A 282 325 670 500 1291 1070 12 14-20-14

15 14-20-15

16 Please refer to page 14-20-62 for specific product precautions. Mist Separator AM Series Model AM250 AM350 AM450 AM650 AM550 AM150 Model AM850 Series AM can separate Note) 750 12000 2200 6000 1500 3500 300 l Rated flow ( /min (ANR)) and remove oil mist in Por t size compressed air which is 1 3 3 3 1 3 1 1 3 1 1 1 1 3 12 1 1 1 1 ,, , ,,, ,, ,, , 4 4 8 2 2 4 4 2 8 8 2 4 2 8 (Nominal size B) difficult to remove by eight (kg) W 1.4 10.5 0.9 4.2 0.38 0.55 2.1 ordinary air filters and Note) Max. flow capacity at a pressure of 0.7 MPa. remove solid particles such Max. flow varies depending on operating pressure. Refer to “Flow Characteristics” (page 14-20-17) and as rust or carbon of more figure of “Max. Air Flow” (page 14-20-18). μ than 0.3 m. It is the most Note) Refer to “Made to Order Specifications” on page 14- Specifications 20-57 for large flow capacity type of AM850 or more. suitable for air sources that Compressed air Fluid drive pilot, metal seal 1.0 MPa Max. operating pressure (1) 0.05 MPa Min. operating pressure solenoid valves. 1.5 MPa Proof pressure C 5 to 60 ° Ambient and fluid temperature 0.3 m (95% particle size collection) μ Filtration 3 (2) (ANR) ( ≅ 0.8 ppm) Max. 1.0 mg/m Oil mist removal rate 2 years or when pressure drop reaches 0.1 MPa Element life Note 1) 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) in the case of types with auto-drain. 3 (ANR) is blown out by compressor Note 2) At oil mist density of 30 mg/m on page 14-20-55. ” Refer to “ Made to Order Specifications Accessory (Option) Applicable model AM850 AM250 AM650 AM350 AM450 AM550 AM150 Bracket assembly With cap bolt and BM54 BM51 BM55 BM56 BM57 BM52 BM53 spring washer Caution JIS Symbol Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety AM Instructions and Common Precautions on the products mentioned in this catalog, pages 14-14-6 to 8 for Precautions on every series, and pages 14-20-55 P. 14-20-62 to 64 for more detailed precautions on every series. How to Order 250 03 AM B J Option Body size B 1 1 ∗ Standard 150 Drain guide female thread J 4 8 Accessory (Option) 1 250 Standard IN-OUT reversal direction R 4 Symbol Description 3 350 T Element service indicator Standard 8 Nil — 1 Standard 450 2 B Bracket 3 Standard 550 4 C N.C. auto-drain 650 1 Standard D N.O. auto-drain 1 Standard 1 850 2 ∗ Refer to the table below for Note) Refer to “How to Order Bowl accessory/Option combinations. Assembly” on page 14-20-59. Thread type Rc Nil  Depends on model Available Not available Accessory/Option Combinations F G Option specifications Applicable model Accessory Accessory (Option) N NPT T AM150 R AM250 DJ AM450 C AM550 AM650 AM850 AM350 C N.C. auto-drain Port size Accessory D N.O. auto-drain B B 3 1 01 06 8 4 1 -J Drain guide B B B 4 1 1 10 02 4 -R IN-OUT reversal direction Option B B 3 1 1 14 03 8 2 -T Element service indicator B B 1 2 20 04 2 14-20-16

17 Mist Separator AM Series Element oil saturation Flow Characteristics to the element. Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage 1 BB B 2 AM850 AM450 AM150 1 1 1 2 8 0.1 MPa Max. flow line 0.1 MPa Max. flow line 0.1 MPa Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate ( /min (ANR)) Air flow rate ( l /min (ANR)) l /min (ANR)) Air flow rate (m B B AM250 3 1 AM550 4 4 0.1 MPa Max. flow line 0.1 MPa Max. flow line Pressure drop (MPa) Pressure drop (MPa) Air flow rate ( l /min (ANR)) Air flow rate ( l /min (ANR)) B AM650 AM350 1 0.1 MPa Max. flow line 0.1 MPa Max. flow line HA  AT Pressure drop (MPa) Pressure drop (MPa) ID  AMG Air flow rate ( /min (ANR)) /min (ANR)) l Air flow rate ( l AFF AM  Misc. 14-20-17

18 Series AM Construction AM650 to AM850 AM150 to AM550 Component Parts Note) Refer to page 14-20-59 for “How to Order Bowl Assembly”. No. Material Note Description Aluminum die-casted Body Chrome treated q ∗ Epoxy coating on inner surface Aluminum die-casted Housing w Note) Sight glass is indicated in the figure above for easy empered glass T Sight glass e understanding of parts, however mounting position is different. Refer to dimensions on pages 14-20-19 to ∗ AM850 is aluminum casted. 14-20-20 for details. Replacement Parts Model No. Description Material AM150 AM250 AM650 AM550 AM450 AM850 AM350 Glass fiber, Element r AM-EL150 AM-EL650 AM-EL450 AM-EL350 AM-EL850 AM-EL250 AM-EL550 Others assembly Element assembly : With gasket and O-ring ∗ Max. flow line Model Selection Max. Air Flow Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6 MPa 3 Max. air flow capacity: 5 m /min (ANR) . Select the point of contact A of inlet pressure and max. air capacity 1 in the graph. AM650 is obtained when the max. flow line is above the point of . 2 intersection A in the graph. /min (ANR)) 3 Note) Make sure to select a model that has the maximum flow ate line above the obtained intersecting point. With a r model that has the maximum flow rate line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. Max. air flow rate (m Inlet pressure (MPa) 14-20-18

19 Mist Separator Series AM Dimensions AM150 to AM650 Accessory D: With auto-drain (N.O.) Drain cock: Black One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray One-touch fitting ∗ N.C. auto-drain not available for AM650. Option J: With drain guide Bracket (Option) female thread T: With element service indicator Drain HA  space Maintenance AT  ID AMG Element service Dimensions with mounting bracket Port size indicator AFF C B G D A E F Model (Nominal size B) H O N U T M L K J I S R Q P 1 1 3 10 37 56 26 5.5 35 1.6 70 4.5 9 15 54 5 24 13 63 159 166 100 20 63 AM150 , , 8 8 4  AM 1 3 10 28 12 37 8 2.0 66 66 6 20 5 84 40 27 20 172 187 76 113 13 76 , 4 8 AM250 1 10 66 37 17 84 28 6 66 2.0 5 12 8 40 27 16 20 76 76 178 119 187 2 Misc. 1 3 , 10 8 100 34 5 7 14 80 2.3 37 22 80 50 32 204 90 20 218 16 145 90 8 2 AM350 3 10 2.3 14 80 8 37 19 100 34 5 7 80 50 32 90 151 90 218 20 210 19 4 1 3 , 10 25 37 50 90 110 9 88 10 9 3.2 14 55 37 225 20 166 241 19 106 106 4 2 AM450 10 110 9 88 10 21 9 14 3.2 50 90 37 55 37 173 20 106 22 232 106 241 1 3 AM550 , 10 130 10 16 4.5 30 37 9 10 60 100 102 65 39 20 200 22 122 122 259 277 1 4 1 AM650 11 , 10 11 37 12 40 76 20 4.5 150 15 136 180 85 55 32 160 253 311 334 160 20 2 14-20-19

20 Series AM Dimensions AM850 Accessory D: With auto-drain (N.O.) for AM850 female thread Option With element service indicator T: Bracket (Option) Drain female thread space Maintenance Dimensions with mounting bracket Port size C B D G A F E Model (Nominal size B) K H L M I J O P Q R S N 1 184 180 220 15 110 13 18 30 6.0 120 24 463.5 460.5 220 10 220 57.5 348 42 AM850 1 ,2 2 14-20-20

21  HA AT  ID AMG AFF AM  Misc. 14-20-21

22 Please refer to page 14-20-62 for specific product precautions. Micro Mist Separator Series AMD Model AMD650 AMD550 AMD450 AMD350 AMD250 AMD150 Model AMD850 Series AMD can separate Note) 200 2000 12000 6000 1000 500 3500 Rated flow ( l /min (ANR)) and remove aerosol state oil size Por t mist in compressed air and 1 3 3 1 1 1 1 1 3 1 3 3 3 1 1 1 1 12 1 ,, , ,, ,, ,, ,, 2 4 8 4 4 4 8 2 2 8 8 4 2 2 (Nominal size B) remove carbon or dust of W eight (kg) 0.38 10.5 4.2 0.55 0.9 1.4 2.1 more than 0.01 μ m. Note) Max. flow capacity at a pressure of 0.7 MPa. It should be used as prefilter Max. flow varies depending on operating pressure. of compressed air for Refer to “Flow Characteristics” (page 14-20-24) and figure of “Max. Air Flow” (page 14-20-23). precision instruments or Model/Self-standing Type lean room required for c AMD1000 Model AMD800 AMD900 higher clean air. Rated flow ( l /min (ANR)) 8000 24000 40000 B B B B B B size (Nominal size B) rt Po 2 2 flange 4 , 4 , 6 flange flange , 3 eight (kg) W 220 430 100 Model/Piping Support Type AMD801 Model AMD901 /min (ANR)) l Rated flow ( 8000 24000 B B B B size (Nominal size B) rt Po flange , 4 flange , 3 2 2 eight (kg) W 50 140 Specifications Compressed air Fluid 1.0 MPa Max. operating pressure (1) 0.05 MPa Min. operating pressure 1.5 MPa Proof pressure 5 to 60 ° C Ambient and fluid temperature 0.01 μ m (95% particle size collection) Filtration 3 (2) (ANR) Max. 0.1 mg/m Oil mist removal rate 3 (At saturation of element oil, less than 0.01 mg/m (ANR)  0.008 ppm) 2 years or when pressure drop reaches 0.1 MPa Element life JIS Symbol Note 1) 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) in the case of types with auto-drain. 3 Note 2) At oil mist density of 30 mg/m ANR is blown out by compressor. “ on page 14-20-55. ” Made to Order Specifications Refer to P. 14-20-55 Accessory (Option) Applicable model AMD150 AMD250 AMD350 AMD450 AMD550 AMD650 AMD850 Bracket assembly With cap bolt and BM54 BM53 BM55 BM56 BM57 BM51 BM52 spring washer Caution Be sure to read before handling.Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, pages 14-14-6 to 8 for Precautions on every series, and pages 14-20-62 to 64 for more detailed precautions on every series. 14-20-22

23 AMD Series Micro Mist Separator How to Order AMD150 to AMD850 03 250 AMD B J ∗ Body size Option B 1 1 ∗ Standard 150 female thread Drain guide J 4 8 Accessory (Option) 1 250 Standard IN-OUT reversal direction R 4 Symbol Description 3 Element service indicator 350 T Standard 8 Nil — 1 Standard 450 2 B Bracket 3 Standard 550 4 C N.C. auto-drain Standard 650 1 D N.O. auto-drain 1 Standard 850 1 2 Refer to the table below for ∗ Note) Refer to “How to Order Bowl Assembly” accessory/option combinations. on page 14-20-59. Thread type Rc Nil G F  Available Not available Depends on model Accessory/Option Combinations N NPT Optional Applicable model Accessory specification Accessory (Option) Port size T DJ R AMD150 AMD550 AMD250 C AMD450 AMD350 AMD650 AMD850 B B 1 3 06 01 8 4 C N.C. auto-drain Accessory B B 1 10 02 1 4 D N.O. auto-drain B B 1 3 14 03 1 1 8 2 J Drain guide B 4 B B 1 2 04 20 2 R IN-OUT reversal direction Option T Element service indicator Piping support type AMD801/901 Self-standing type AMD800 to AMD1000 20 01 AMD 20 AMD 00 8 8 Body size size Port Body size Port size B B 8 8 20 2 flange 2 20 flange B B 9 9 flange 30 3 flange 30 3 B B 10 flange 4 40 flange 4 40 B 6 flange 60 ype T ype T 00 With manual drain cock With manual drain cock 01 With auto-drain 10 With auto-drain 11 Max. flow line Max. Air Flow Model Selection Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6 MPa 3 /min (ANR) Max. air flow capacity: 5 m  HA 1. Select the point of contact A of inlet pressure and max. air capacity in the graph. AT AMD650 is obtained when the max. flow line is above the point of 2. intersection A in the graph. ID  Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting point. /min (ANR)) With amodel that has the maximum flow rate line 3 AMG below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being AFF unable to satisfy the specifications.  AM Max. air flow rate (m Misc. Inlet pressure (MPa) 14-20-23

24 Series AMD Flow Characteristics /Select the model taking the max. flow capacity into consideration. ———— Element oil saturation Initial condition Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. B B B 3 1 AMD900/901 AMD550 AMD150 2 8 4 0.1 MPa 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line 0.1 MPa Max. flow line 0.1 MPa Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) Max. flow line 3 Air flow rate ( l Air flow rate ( /min (ANR)) l /min (ANR)) Air flow rate (m /min (ANR)) B B B 1 AMD100 AMD250 AMD650 1 4 4 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line 0.1 MPa Max. flow line 0.1 MPa Pressure drop (MPa) Max. flow line Pressure drop (MPa) Pressure drop (MPa) 0.1 MPa 3 Air flow rate ( l /min (ANR)) Air flow rate ( l /min (ANR)) /min (ANR)) Air flow rate (m B B AMD350 AMD800/801 3 2 8 0.1 MPa 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate ( l /min (ANR)) /min (ANR)) Air flow rate (m BB 1 1 AMD450 AMD850 2 1 2 0.1 MPa 0.1 MPa Max. flow line Pressure drop (MPa) Pressure drop (MPa) 0.1 MPa Max. flow line 0.1 MPa 3 /min (ANR)) l Air flow rate ( Air flow rate (m /min (ANR)) 14-20-24

25 Micro Mist Separator Series AMD Construction AMD850 AMD150 to AMD650 Component Parts Note: Refer to page 14-20-59 for “How to Order Bowl Assembly”. Note Material No. Description Body Chrome treated q Aluminum die-casted Note: Sight glass is indicated in the figure above for easy Epoxy coating on inner surface ∗ Housing w Aluminum die-casted understanding of parts, however mounting position is Sight glass T empered glass e different. Refer to dimensions on pages 14-20-26 to 14-20-27 for details. ∗ AMD850 is aluminum casted. Replacement Parts Model No. Material Description AMD150 AMD550 AMD350 AMD650 AMD450 AMD850 AMD250 Glass fiber, Element r AMD-EL150 AMD-EL550 AMD-EL850 AMD-EL250 AMD-EL650 AMD-EL350 AMD-EL450 Others assembly Element assembly: With gasket and O-ring ∗ AMD800 to 1000  HA AT ID  Component Parts Model AMG Note No. Description AMD801/901 AMD800/900/1000 q SGP-E, SS400 SGP-E, SS400 Filter case AFF w SGP-E, SS400 SS400 Cover Replacement Parts AM  Model No. Description Material AMD901 AMD800 AMD801 AMD900 AMD1000 Misc. Element e 63174 3 pcs. 63174 3 pcs. 63174 5 pcs. — 63174 63174 Element r 63148 3 pcs. 63148 3 pcs. 63148 5 pcs. 63148 63148 NBR Pa king c O. .112 x I.D.90 O. D112 x I.D90 O. D .112 x I.D.90 D t NBR — — Pa king c x T3 5 pcs. x T3 3 pcs. x T3 Drain y AL-62S AL-63S AL-60S AL-61S AL-31S V#6500 Gasket JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 u NBR O-ring 1 pc. 1 pc. 3 pcs. 5 pcs. 3 pcs. 14-20-25

26 Series AMD Dimensions AMD150 to AMD650 Accessory D: With auto-drain (N.O.) Drain cock: Black One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray One-touch fitting N.C. auto-drain not available for AMD650. ∗ Option Bracket J: With drain guide (Option) emale thread f With element service indicatior T: Drain Maintenance space Element service Dimensions with mounting bracket size Por t indicator A E F G D C B Model (Nominal size B) H M R L S N U K T Q I P J O 1 1 3 166 13 63 100 159 20 63 10 54 26 37 5.5 70 35 9 4.5 15 1.6 5 56 24 AMD150 , , 4 8 8 3 1 187 13 20 10 113 76 76 172 28 6 20 40 5 12 66 37 2.0 8 84 66 27 , 8 4 AMD250 1 187 119 76 16 76 10 178 20 17 40 66 66 6 28 8 84 2.0 5 12 37 27 2 1 3 , 218 16 145 90 204 20 90 10 7 5 14 34 80 80 8 22 37 50 2.3 100 32 2 8 AMD350 3 218 210 90 20 19 10 151 90 2.3 5 80 7 8 80 100 50 19 34 14 37 32 4 1 3 , 241 225 166 19 106 20 106 10 14 9 88 110 9 50 37 3.2 55 25 90 10 37 2 4 AMD450 241 10 232 22 20 106 106 173 21 9 110 14 88 90 37 55 9 10 3.2 50 37 1 3 AMD550 , 277 22 122 10 259 122 200 20 130 10 16 102 60 30 10 65 37 4.5 9 100 39 1 4 1 AMD650 11 , 334 32 10 160 20 160 311 253 76 40 136 180 20 12 37 4.5 15 85 150 11 55 2 14-20-26

27 Micro Mist Separator Series AMD AMD850 Dimensions Accessory D: With auto-drain (N.O.) for AMD850 female thread Option With element service indicator T: Bracket (Option) 2-port size HA  AT  ID Drain female thread AMG Maintenance space AFF AM  Misc. Dimensions with mounting bracket Port size B C D E F A G Model (Nominal size B) Q L I K H R S P O J M N 1 463.5 110 15 18 30 6 460.5 184 13 180 220 24 120 348 10 220 220 42 57.5 AMD850 1 ,2 2 14-20-27

28 Series AMD Dimensions AMD801/901/800/900/1000 AMD801/901 ORIENTATION Label Model Connection (Flange) E G J D A F H øB øC B B 150 887 3 760 400 280 1033 270 6 AMD801 2 B B B B AMD901 300 1318 620 445 3 520 795 972 12 , 4 , 3 2 AMD800/900/1000 ORIENTATION holes Label Drain Model Connection (Flange) øC G F A E D H øB Anchor bolt B B B AMD800 500 300 1300 8 20 1430 1520 300 400 l M16 x , 3 2 B B B AMD900 400 300 720 1320 560 24 1480 1585 l M20 x 500 , 4 , 3 2 B B AMD1000 870 M20 x 500 l 550 1380 1740 1610 300 745 24 , 6 4 Please refer to Made to Order Specifications of Series AMD on pages 14-20-55 to 14-20-57. 14-20-28

29  HA AT  ID AMG AFF AM  Misc. 14-20-29

30 Please refer to pages 14-20-62 for specific product precautions. Micro Mist Separator with Prefilter AMH Series Model AMH550 AMH650 AMH450 AMH350 AMH250 AMH850 Model AMH150 Series AMH can separate Note) 500 1000 3500 12000 6000 2000 200 /min (ANR)) Rated flow ( l and remove aerosol state oil mist in compressed air Por t size 3 1 1 1 3 1 3 3 3 1 1 3 1 1 12 1 1 1 1 ,, , , , ,, ,, , , 8 2 2 4 4 2 4 8 4 4 2 2 8 8 (Nominal size B) and remove carbon or dust 1.4 0.9 0.55 0.38 10.5 4.2 2.1 W eight (kg) of more than 0.01 μ m. Note) Max. flow capacity at pressure of 0.7 MPa. It varies depending on operating pressure. It should be used as Refer to “Flow Characteristics” (page 14-20-32) and figure of “Max. Air Flow” (page 14-20-30). prefilter of compressed air or precision instruments f Specifications Compressed air Fluid or clean room required for 1.0 MPa Max. operating pressure higher clean air. (1) 0.05 MPa Min. operating pressure 1.5 MPa Proof pressure The conventional pneumatic pres- C 5 to 60 ° Ambient and fluid temperature sure line Series AM + Series AMD μ m (95% particle size collection) 0.01 Filtration 3 (2) have been integrated to achieve a (ANR) Max. 0.1 mg/m Oil mist removal rate 3 (At saturation of element oil, less than 0.01 mg/m 0.008 ppm) ≅ (ANR) reduction in installation space, 2 years or when pressure drop reaches 0.1 MPa Element life savings in piping installation labor, Note 1) 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) in the case of types with auto-drain. and reduced costs. 3 ANR is blown out by compressor. Note 2) At oil mist density of 30 mg/m Made to Order Specifications ” Refer to on page 14-20-55. “ Accessory (Option) Applicable model AMH150 AMH250 AMH350 AMH450 AMH550 AMH650 AMH850 Bracket assembly BM56 BM54 BM53 BM52 BM51 BM57 BM55 With cap bolt and spring washer Model Selection Max. Air Flow Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6 MPa 3 /min (ANR) Max. air flow capacity: 5 m /min (ANR)) 1. Select the point of contact A of inlet pressure 3 and max. air capacity in the graph. AMH650 is obtained when the max. flow line is 2. aboveabove the point of intersection A in the JIS Symbol gr aph. Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting Max. air flow rate (m point. With a model that has the 14-20-55 P. maximum flow rate line below the obtained intersecting point, the flow Inlet pressure (MPa) ate will be exceeded, thus leading r to a problem such as being unable to satisfy the specifications. Caution Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, pages 14-14-6 to 8 for Precautions on every series, and pages 14-20-62 to 64 for more detailed precautions on every series. 14-20-30

31 Micro Mist Separator with Prefilter AMH Series How to Order AMH150 to AMH850 250 03 AMH B J Option Body size B 1 1 ∗ Standard 150 Drain guide female thread J 4 8 Accessory (Option) 1 Standard 250 IN-OUT reversal direction R 4 Symbol Description 3 T Element service indicator Standard 350 8 Nil — 1 Standard 450 2 B Bracket 3 Standard 550 4 C N.C. auto-drain 1 Standard 650 D N.O. auto-drain 1 Standard 1 850 2 Note) Refer to “How to Order Bowl Assembly” on page 14- Refer to the table below for ∗ 20-59. accessory/option combinations. Thread type Rc Nil F G Av ailable Not available  Depends on model Accessory/Option Combinations NPT N Option Applicable model Accessory specifications Accessory (Option) C R AMH250 AMH150 AMH450 AMH350 AMH550 AMH650 AMH850 DJ T Port size C N.C. auto-drain B B 1 3 01 06 4 8 Accessory D N.O. auto-drain B B 1 10 1 02 4 1 -J Drain guide B B B 4 3 1 14 1 03 2 8 -R IN-OUT reversal direction Option B B 1 2 04 20 2 -T Element service indicator HA  AT ID  AMG AFF AM  Misc. 14-20-31

32 AMH Series /Select the model taking the max. flow capacity into Flow Characteristics ———— Element oil saturation Initial condition Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. B 1 B B 2 1 1 1 AMH850 AMH450 AMH150 2 8 Inlet air pressure Air pressure Inlet air pressure Max. flow Max. flow line line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) Max. flow line 3 Air flow rate ( l Air flow rate (m /min (ANR)) /min (ANR)) /min (ANR)) Air flow rate ( l B B 3 1 AMH550 AMH250 4 4 Inlet air pressure Air pressure Max. flow line Pressure drop (MPa) Pressure drop (MPa) Max. flow line /min (ANR)) Air flow rate ( l /min (ANR)) Air flow rate ( l B 3 B AMH650 8 AMH350 1 Inlet air pressure Air pressure 0.5 Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) Air flow rate ( l /min (ANR)) Air flow rate ( l /min (ANR)) 14-20-32

33 Micro Mist Separator with Prefilter Series AMH Construction AMH850 AMH150 to AMH650 Component Parts Note: Refer to page 14-20-59 for “How to Order Bowl Assembly”. Note No. Material Description Body Aluminum die-casted Chrome treated q ∗ Epoxy coating on inner surface Housing Aluminum die-casted w Note: Sight glass is indicated in the figure above for easy Sight glass empered glass T understanding of parts, however mounting position is e different. Refer to dimensions on pages 14-20-34 to 14-20- AMH850 is aluminum casted. ∗ Replacement Parts 35 for details. Model No. Description Material AMH150 AMH550 AMH250 AMH850 AMH350 AMH650 AMH450 Element Glass fiber, r AMH-EL450 AMH-EL150 AMH-EL650 AMH-EL250 AMH-EL850 AMH-EL550 AMH-EL350 assembly Others Element assembly: With gasket and O-ring ∗ HA  AT ID  AMG AFF AM  Misc. 14-20-33

34 Series AMH Dimensions AMH150 to AMH650 Accessory D: With auto-drain (N.O.) Drain cock: Black One-touch fitting C: With auto-drain (N.C.) Drain cock: Gray One-touch fitting N.C. auto-drain not available for AMH650. ∗ Option Bracket J: With drain guide (Option) emale thread f T: With element service indicator Drain space Maintenance Element service Dimensions with mounting bracket size Por t indicator G C E D B F A Model (Nominal size B) H U R O Q I N S L P J T K M 1 3 1 166 10 54 9 1.6 15 5.5 70 4.5 35 5 26 37 56 24 63 100 13 159 63 20 AMH150 , , 4 8 8 1 3 187 10 2 28 8 12 6 40 20 37 66 84 66 5 27 76 172 76 20 13 113 , 4 8 AMH250 1 187 10 66 17 28 40 2 12 37 5 66 84 8 6 27 16 119 76 20 178 76 2 1 3 , 218 10 14 8 7 34 5 2.3 22 50 100 80 80 37 32 90 204 145 90 16 20 8 2 AMH350 3 218 10 100 8 2.3 80 5 50 80 37 34 7 14 19 32 20 90 19 90 210 151 4 1 3 , 241 10 90 10 25 55 9 9 3.2 88 50 110 14 37 37 20 225 19 106 106 166 4 2 AMH450 241 10 10 14 88 3.2 110 90 55 50 37 21 9 9 37 173 20 232 106 106 22 1 3 AMH550 , 277 10 4.5 10 10 100 16 102 30 9 130 65 60 37 39 122 259 20 200 122 22 1 4 1 AMH650 11 , 334 10 40 180 136 85 150 11 37 4.5 12 20 76 15 55 160 253 20 32 160 311 2 14-20-34

35 AMH Series Micro Mist Separator with Prefilter AMH850 Dimensions Accessory D: With auto-drain (N.O.) for AMD850 female thread Option T: With element service indicator Bracket (Option) HA  AT ID  Drain female thread Maintenance space AMG AFF  AM Misc. Dimensions with mounting bracket Port size E C F B A G D Model (Nominal size B) I O L P H Q M R J S N K 1 180 18 110 220 184 120 13 24 15 6.0 460.5 463.5 30 10 220 57.5 220 348 42 AMH850 ,2 1 2 Please refer to Made to Order Specifications of Series AMH on pages 14-20-55 to 14-20-57. 14-20-35

36 14-20-36

37 Please refer to pages 14-20-62 to 64 for specific product precautions. Super Mist Separator AME Series Model AME650 AME550 AME450 AME350 AME250 Model AME150 AME850 Series AME separates and Note) 2000 200 1000 500 6000 12000 3500 absorbs aerosol state fine l Rated flow ( /min (ANR)) oil particles in compressed Por t size 3 1 1 1 3 3 1 1 3 3 1 1 3 1 1 12 1 1 1 ,, ,, ,, ,, , ,, 2 8 2 4 4 4 8 8 8 2 4 2 2 4 (Nominal size B) air and changes the oil lu- W eight (kg) 1.4 0.9 0.38 0.55 2.1 4.2 10.5 bricating compressed air to Note) Max. flow capacity at a pressure of 0.7 MPa. oilless equivalent air. Max. flow varies depending on operating pressure. It should be applied for fil- Refer to “Flow Characteristics” (page 14-20-38) and figure of “Max. Air Flow” (page 14-20-38). tration of compressed air Specifications requiring high cleanliness Compressed air Fluid f or coating lines, com- 1.0 MPa Max. operating pressure pressed air for clean rooms 0.05 MPa Min. operating pressure 1.5 MPa Proof pressure and compressed air for 5 to 60 C ° Ambient and fluid temperature equipment that must avoid 0.01 μ m (95% particle size collection) Filtration oils. m or larger per liter of air Less than 3.5 particles 0.3 μ Oil mist removal rate (100 particles or less per cubic foot) Due to its special configuration, Element color indicator (When an element becomes saturated Element life with oil the element surface changes from white to red.) Series AME indicates the life of the filter element by a color change. Refer to “Made to Order Specifications” on page 14-20-57. Accordingly, the replacement time can be judged visually. (A red color spot indicates the replacing time.) Accessory (Option) By all means Series “AM” should be Applicable model AME150 AME250 AME350 AME450 AME550 AME650 AME850 used as a prefilter. Additionally the Bracket assembly Series “AMF” in the rear stage can With cap bolt and BM54 BM51 BM56 BM57 BM53 BM52 BM55 produce high quality compressed air spring washer as an air source for clean rooms. How to Order 250 03 AME R B  HA Option specifications AT IN-OUT reversal direction R Body size 1 150 Standard Accessory (Option) 8 ID  1 Standard 250 4 Nil Nil 3 350 Standard 8 B Bracket 1 Standard 450 AMG 2 size Port 3 Standard 550 4 B 1 01 8 1 Standard 650 AFF B 1 Thread type 02 4 1 Standard 1 850 2 B 3 03 8 Rc Nil JIS Symbol B 1  AM 04 2 G F AME 14-20-57 P. B 3 06 NPT N 4 B 10 1 Misc. B 1 1 14 2 B 2 20 Caution Note) Refer to “How to Order Bowl Assembly” on page Be sure to read before handling. 14-20-59. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, pages 14-14-6 to 8 for Precautions on very series, and pages 14-20-62 e to 64 for more detailed precau- tions on every series. 14-20-37

38 Series AME Element initial condition Flow Characteristics Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. B B B 1 1 AME650 AME450 AME150 1 2 8 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) l /min (ANR)) l l Air flow rate ( Air flow rate ( Air flow rate ( /min (ANR)) /min (ANR)) B B B 1 3 1 2 AME550 AME250 AME850 4 4 1 Max. flow line Pa 0.1 M 0.1 MPa 0.1 MPa Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) 3 /min (ANR)) l Air flow rate ( Air flow rate ( /min (ANR)) l /min (ANR)) Air flow rate (m B 3 AME350 8 Max. Air Flow 0.1 MPa Max. flow line Pressure drop (MPa) /min (ANR)) 3 /min (ANR)) l Air flow rate ( Model Selection Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration. (Example) Inlet pressure: 0.6 MPa Max. air flow rate (m 3 /min (ANR) Max. air flow capacity: 5 m Select the point of contact A of inlet pressure and max. air capacity in 1. the graph. 2. AME650 is obtained when the max. flow line is above the point of inter- section A in the graph. Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting point. With a model that has the maximum flow rate line below the obtained intersecting point, the flow rate will be exceeded, thus Inlet pressure (MPa) leading to a problem such as being unable to satisfy the specifications. 14-20-38

39 Super Mist Separator AME Series Construction Component Parts Note: Refer to page 14-20-59 for “How to Order Bowl Note Material No. Description Assembly”. Body Chrome treated q Aluminum die-casted Epoxy coating on inner surface ∗ Note: Sight glass is indicated in the figure above for easy Housing w Aluminum die-casted understanding of parts, however mounting position Sight glass — e empered glass T is different. Refer to dimensions on pages 14-20-40 ∗ AM850 is aluminum casted. Replacement Parts to 14-20-41 for details. Model No. Material Description AME350 AME450 AME250 AME550 AME850 AME650 AME150 Glass fiber, Element r AME-EL650 AME-EL550 AME-EL850 AME-EL350 AME-EL250 AME-EL150 AME-EL450 Others assembly Element assembly: With gasket and O-ring ∗ HA  AT ID  AMG AFF AM  Misc. 14-20-39

40 AME Series Dimensions AME150 to AME350 Bracket (Option) 2-port size space Maintenance Dimensions with mounting bracket Por t size C G B E A F D Model (Nominal size B) H N Q P M L S K J R I O 1 1 3 5.5 4.5 146 54 5 9 15 1.6 56 70 35 26 63 13 55 139 63 7.5 10 AME150 , , 8 4 8 1 3 6 5 66 8 28 2.0 167 20 66 12 40 84 4 66 13 152 76 10 76 , 4 8 AME250 1 6 5 17 40 12 8 167 66 2.0 84 28 66 158 76 16 72 10 4 76 2 3 1 7 , 5 80 50 34 2.3 198 8 100 14 22 80 16 92 90 5 90 10 184 2 8 AME350 3 7 5 80 34 19 8 198 100 2.3 50 80 14 90 98 5 19 10 90 190 4 14-20-40

41 Super Mist Separator Series AME AME450 to AME850 Dimensions Bracket (Option) 2-port size HA  AT Maintenance space ID  AMG AFF Dimensions with mounting bracket Port size H C A D B G E F Model (Nominal size B) N R Q M L K J O I P S  AM 1 3 3.2 9 221 50 110 36 25 90 88 14 10 55 100 19 106 3 106 205 10 , 4 2 AME450 3.2 1 110 55 22 88 106 9 14 90 3 10 21 50 212 106 221 36 10 107 Misc. 3 , 1 4.5 102 16 10 130 257 60 65 100 44 9 30 122 22 10 3 122 239 128 AME550 4 1 1 , 1 4.5 AME650 40 180 15 314 20 136 11 76 66 85 150 160 167 291 160 10 32 — 2 1 1 , 6 AME850 180 15 13 96 220 184 30 120 24 110 406 220 — 42 10 403 235 220 2 2 Please refer to page 14-20-57 for Made to Order Specifications. 14-20-41

42 Please refer to pages 14-20-62 to 64 or specific product precautions. f Odor Removal Filter Series AMF Model AMF650 AMF550 AMF450 AMF250 AMF350 AMF850 AMF150 Model Series AMF Odor Removal Note) 6000 2000 12000 500 3500 1000 200 Filter efficiently removes l Rated flow ( /min (ANR)) odor in compressed air size Por t 1 3 1 3 3 1 3 1 1 1 3 1 1 3 12 1 1 1 1 ,, ,, ,, ,, , ,, 2 4 4 4 2 2 8 4 8 2 4 8 8 2 (Nominal size B) with an activated carbon 2.1 4.2 1.4 0.38 0.9 0.55 10.5 W eight (kg) element. Note) Max. flow capacity at a pressure of 0.7 MPa. The unit is designed for Max. flow varies depending on operating use in food processing, pressure. Refer to “Flow Characteristics” (page 14-20-44) and figure of “Max. Air Flow” pharmaceutical, brewing (page 14-20-45). Model/Self-standing Type and breathing systems AMF1000 Model AMF800 AMF900 where odors must be Rated flow ( l /min (ANR)) 8000 24000 40000 B B B B B B Po rt size (Nominal size B) 2 , , 6 flange , 2 4 flange flange 4 3 removed. eight (kg) W 90 200 410 Removes odor and gas ingredients in compressed air. Model/Piping Support Type Activated carbon element with AMF801 Model AMF901 2 large filtration area (1420 m /g) Rated flow ( l/ min (ANR)) 8000 24000 B B B B size (Nominal size B) rt Po 3 4 , flange , flange 2 2 Easy replacement of elements eight (kg) W 40 120 Specifications Compressed air Fluid 1.0 MPa Max. operating pressure 0.05 MPa Min. operating pressure 1.5 MPa Proof pressure 5 to 60 C ° Ambient and fluid temperature m (95% particle size collection) μ 0.01 Filtration Less than 3.5 particles 0.3 m or larger per liter of air (100 particles or μ Oil mist removal rate less per cubic foot) Series “AME” should be installed on the inlet side.) Please refer to Made to Order Specifications ” “ on page 14-20-57. Accessory (Option) Applicable model AMF150 AMF250 AMF350 AMF450 AMF550 AMF650 AMF850 JIS Symbol Bracket assembly AMF With cap bolt and BM54 BM53 BM52 BM51 BM56 BM55 BM57 spring washer Caution Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety 14-20-57 P. Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 14-14-6 to 8 for Precautions on every series, and pages 14-20- 62 to 64 for more detailed precautions on every series. 14-20-42

43 AMF Series Odor Removal Filter How to Order AMF150 to AMF850 250 03 AMF R B Option IN-OUT reversal direction R Body size 1 Standard 150 Accessory (Option) 8 1 250 Standard 4 Bracket Nil 3 350 Standard 8 B Nil 1 Standard 450 2 3 Piping port (B dimension) 550 Standard 4 B 650 1 Standard 1 01 8 1 B Standard 1 850 1 2 02 4 B 3 03 8 Thread type B 1 04 2 Rc Nil B 3 06 4 G F B 10 1 NPT N Note) Refer to “How to Order Bowl Assembly” B 1 14 1 2 on page 14-20-59. B 20 2 AMF801/901 Piping Support type AMF800 to AMF1000 Self-standing type 20 80 AMF 20 80 AMF 1 0 Body size Body size 80 80 90 90 Port size Port size 100 B B flange 2 20 flange 2 20 essel shape V B B flange 3 30 flange 3 30 V essel shape Piping support type B B 4 flange 40 40 4 flange Self-standing type B 6 flange 60 Max. Air Flow Model Selection Select the model in accordance with the following procedure taking the inlet pressure and max. air flow into consideration.  HA (Example) Inlet pressure: 0.6 MPa 3 /min (ANR) Max. air flow capacity: 5 m AT Select the point of contact A of inlet pressure and max. air capacity 1. in the graph. AMF650 is obtained when the max. flow line is above the point of 2. ID  intersection A in the graph. AMG Note) Make sure to select a model that has the maximum flow rate line above the obtained intersecting point. /min (ANR)) 3 With a model that has the maximum flow rate line AFF below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being AM  unable to satisfy the specifications. Misc. Max. air flow rate (m Inlet pressure (MPa) 14-20-43

44 Series AMF Element initial condition /Refer to “How to Select” on page 14-20-43 regarding model selection. Flow Characteristics to the element. Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage B B B 1 3 2 AMF900/901 AMF550 AMF150 8 4 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) 3 l /min (ANR)) Air flow rate ( /min (ANR)) /min (ANR)) l Air flow rate ( Air flow rate (m B B B 1 4 1 4 AMF650 AMF1000 AMF250 0.1 MPa 0.1 MPa 0.1 MPa Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) Pressure drop (MPa) Air flow rate ( l /min (ANR)) 3 /min (ANR)) l /min (ANR)) Air flow rate ( Air flow rate (m B B 3 2 AMF800/801 AMF350 8 0.1 MPa 0.1 MPa Pressure drop (MPa) Pressure drop (MPa) Max. flow line 3 Air flow rate (m /min (ANR)) /min (ANR)) l Air flow rate ( B B 1 1 2 2 1 AMF450 AMF850 0.1 MPa 0.1 MPa Max. flow line Max. flow line Pressure drop (MPa) Pressure drop (MPa) 3 Air flow rate (m l /min (ANR)) Air flow rate ( /min (ANR)) 14-20-44

45 Odor Removal Filter Series AMF Construction AMF150 to AMF850 Component parts Note: Refer to page 14-20-59 for “How to Order Bowl Material Note No. Description Assembly”. Body Chrome treated q Aluminum die-casted Epoxy coating on inner surface ∗ Housing w Aluminum die-casted Note: Sight glass is indicated in the figure above for easy Sight glass T empered glass — e understanding of parts, however mounting position is different. Refer to dimensions on pages 14-20-46 to ∗ AMF850 is aluminum casted. Replacement Parts 14-20-47 for details. Model No. Description Material AMF650 AMF550 AMF250 AMF450 AMF350 AMF850 AMF150 Glass fiber, Element r AMF-EL650 AMF-EL250 AMF-EL550 AMF-EL850 AMF-EL350 AMF-EL450 AMF-EL150 Others assembly ∗ Element assembly: With gasket and O-ring AMF800 to 1000 HA  AT  ID Component Parts AMG Model Note No. Description AMF801/901 AMF800/900/1000 AFF q SGP-E: SS400 SGP-E: SS400 Filter case Element w SGP-E: SS400 SS400 Cover AM  Replacement Parts Misc. Model No. Description Material AMF901 AMF800 AMF801 AMF1000 AMF900 e 63271 3 pcs. 63271 3 pcs. 63271 5 pcs. — 63271 63271 Element r 63148 63148 63148 3 pcs. 63148 3 pcs. 63148 5 pcs. NBR Pa king c Drain D D. 112 x I.D.90 D. .112 x I.D.90 O. O. 112 x I.D.90 O. t NBR — — king c Pa x T3 1 pc. x T3 3 pcs. x T3 5 pcs. AL-61S AL-60S y AL-62S AL-31S V#6500 AL- 63S 3 pcs. Gasket JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 JIS B 2401G35 u NBR O-ring 1 pc. 1 pc. 3 pcs. 3 pcs. 5 pcs. 14-20-45

46 AMF Series AMF150 to AMF350 Dimensions Bracket (Option) 2-port size space Maintenance Dimensions with mounting bracket Por t size C G F E A B D Model (Nominal size B) H N Q P M L S K J R I O 1 1 3 , , 7.5 5.5 70 1.6 146 5 54 9 26 15 35 4.5 56 13 63 63 139 55 10 AMF150 8 8 4 3 1 4 , 6 66 28 66 84 167 12 40 2.0 5 8 20 152 76 66 76 13 10 8 4 AMF250 1 4 6 28 40 8 5 12 66 2.0 167 17 66 84 158 76 16 72 10 76 2 1 3 5 7 80 80 50 34 2.3 198 8 100 14 5 22 184 16 92 90 90 10 , 2 8 AMF350 3 5 7 14 34 19 8 198 100 80 2.3 50 80 5 98 90 19 90 10 190 4 14-20-46

47 Odor Removal Filter Series AMF Dimensions AMF450 to AMF850 Bracket (Option) 2-port size HA  AT Maintenance space ID  AMG AFF Dimensions with mounting bracket Port size H B D C A F E G Model (Nominal size B) J S R N I Q M L P K O AM  1 3 3.2 , 90 110 221 55 9 88 25 36 10 50 14 106 106 100 10 19 205 3 4 2 AMF450 3.2 1 9 88 50 10 22 14 3 110 55 106 21 10 212 107 106 221 36 90 3 , 1 4.5 102 16 60 10 30 65 100 130 257 9 44 122 128 3 22 10 239 122 AMF550 Misc. 4 1 1 , 4.5 1 AMF650 76 180 85 150 11 20 136 15 40 314 66 — 167 160 291 32 160 10 2 1 1 , 6 AMF850 13 96 220 24 180 120 110 30 184 406 15 220 235 403 42 — 10 220 2 2 14-20-47

48 Series AMF Dimensions AMF801/901/800/900/1000 AMF801/901 ORIENTATION Label Model Connection (Flange) G F J E D øC øB A H B 270 400 6B 797 550 3 150 280 823 AMF801 2 B B B , , AMF901 520 445 570 1093 620 300 3 12B 867 4 3 2 AMF800/900/1000 ORIENTATION holes Label Drain Connection (Flange) Model øC H øB E F G D A Anchor bolt B B 1070 1290 20 1200 8 300 500 330 400 M16 x l AMF800 2 B B B , , AMF900 400 300 1070 720 24 560 1335 1230 l M20 x 500 4 3 2 B B , AMF1000 870 500 M20 x l 550 24 1450 1090 300 1320 745 6 4 14-20-48

49 Related Products: Auto Drain Valve AD402/600 Model/Specifications AD402 AD600 Model Drainage is automatically Proof pressure 1.5 MPa 1.5 MPa discharged in a reliable Max. operating pressure 1.0 MPa 1.0 MPa Note) Operating pressure range 0.1 to 1.0 MPa 0.3 to 1.0 MPa manner, without requiring Ambient and fluid temperature –5 to 60 ° C (No freezing) –5 to 60 ° C (No freezing) human operators. 3 1 1 3 size Por t 1 , Rc Rc , , 4 4 2 8 3 3 Drain discharge port size , 1 8 4 Highly resistant to dust and corro- eight (g) W 2100 620 sion, operates reliably, and a bowl l /min (ANR). Note) Use for air compressor with flow larger than 400 guard is provided as standard equipment. Option Specifications Metal bowl AD402- -2 Precautions Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to pages 14-14-6 to 8 for Precautions on every series. Selection Piping arning W arning W AD402 AD600 Use auto-drain under the following 1. Use auto-drain under the following 1. JIS Symbol operating conditions, or it will lead to operating conditions, or it will lead to malfunctions. malfunctions. 1) Operate the compressor above 3.7 kw To connect a drain discharge pipe, use {400 l /min (ANR)}. a pipe with a minimum bore of ø10, and a maximum length of 5 m. Avoid using a 2) Use AD402 at an operating pressure iser pipe. r above 0.1 MPa and AD600 above 0.3 MPa. Construction/Dimensions AD600 Rc 1/4, 3/8, 1/2 AD402 V alve assembly Rc 3/4, 1 Body O-ring Body Gauze Lever V alve O-ring  HA Chamber Piston assembly Float AT Spring Case Long hole ID  Piston of chamber O-ring Rc 3/4, 1 AMG Drain guide Component Parts Drain Rc 3/8 AFF No. Material Description Aluminum die-casted q Body •W orking principle (AD402) AM  0 ! When no pressure is applied internally to bowl descends of t , float Replacement Parts closes chamber hole Piston i is . y its own weight and valve o Model Misc. ! , and the drainage passes through the 1 pushed down by spring Material No. Description AD402 AD600 chamber’s elongated hole ! 2 to enter the housing and is discharged. O-ring NBR w JIS B 2401G-100 113136 • When pressure is applied internally to the bowl: Stainless steel e — 20062 Gauze When pressure is larger than 1 MPa, it overcomes the force of spring — . , allowing piston r i to ascend, and comes in contact with O-ring ! 1 (1) AD34PA — Internal assembly Thus, the inside of bowl ! 0 is isolated from the outside. — i — 20025A Piston assembly • When drainage has accumulated: — 4 ! 201037P — alve assembly V , y Float , s hole t ascends due to flotation and opens the chamber ! . ! to r Note 1) Internal assembly: Assembly for parts 0 except 2 . y Piston i descends due to allowing the pressure to enter chamber Note 2) Part no. for bowl assembly: AD34 , and the accumulated ! the force of the internal pressure and spring 1 0 ! : Note 3) Part no. for bowl 201016 drainage is discharged through drain guide 3 . ! 14-20-49

50 Related Products: Motor Operated Auto Drain ADM200 Series Model/Specifications Model - ADM200- Reliably discharges even highly Fluid Air viscous drainage Max. operating pressure 1.0 MPa Highly resistant to dust and highly viscous Proof pressure 1.5 MPa drainage, the valve opens and closes C (No freezing) –5 to 60 ° Ambient and fluid temperature reliably to discharge the drainage. ∗ 1 cycle in a minute (Standard) Operating cycle Large drain discharge capacity 2 sec./cycle (Standard) Operating time 50 With a large discharge port, a large 100, 200 VAC Hz, Other Power source 60 amount of drainage can be discharged in a 4 W Power consumption 1 3 single operation. IN: Rc , 8 2 Port size 3 OUT: Rc 8 Elimination of residual drainage from inside 550 g Weight of the tank and pipes prevents the If the operating cycle is twice in a minute (op. time 2 sec. x 2) operating time is 4 sec. each minute. ∗ generation of foreign matter as a result of dried rust or drainage, which could the tank. Failure to observe this precaution adversely affect the equipment located on Precautions could lead to malfunctions. the outlet side. Install this product, so that its drain port 2. Be sure to read before handling. f aces down. Failure to observe this Low power consumption: 4 W precaution could lead to malfunctions. Refer to pages 14-21-3 to 4 for Safety A long pipe can also be connected to the Instructions and Common Precau- Caution discharge port. tions on the products mentioned in It can be connected directly to a Provide a stop valve before ADM200 to 1. this catalog, and refer to pages 14-14- acilitate maintenance and inspection. f compressor. 6 to 8 for Precautions on every series. Maintenance Mounting Caution 1. If the valve becomes clogged with debris, W arning press the manual button to flush out the Install this product after discharging the 1. debris. Failure to observe this precaution drainage that has already accumulated in could lead to malfunctions. Mounting Example Compressor Aftercooler Air tank How to Order Main line filter Air dryer ADM200 Port size Symbol IN OUT 3 3 03 8 8 3 1 04 2 8 Construction/Dimensions Voltage 50 1 100 VAC Hz 60 50 2 200 VAC Hz 60 50 3 240 VAC Hz 60 50 4 Set screw 110 VAC Hz 60 50 5 220 VAC Hz 60 6 24 VDC 7 12 VDC Operating time/ Manual button Applicable compressor Nil 2 sec/min (1 cycle/min) /3.7 to 37 kW 4 4 sec/min (2 cycle/min) /37 to 75 kW 6 6 sec/min (3 cycle/min) /75 to 110 kW Replacement Parts Component Parts 8 8 sec/min (4 cycle/min) /220 to 370 kW Part no. Material Note Material No. No. Description Description Note) Body Chrome treated e q Motor ADC12 812PG-voltage — Cap Chrome treated w ADC12 Operating time 201324 (Nil) r 201325 (4) Cam SCS13 201326 (6) 201327 (8) t Valve assembly C3604B 20137-1A O-ring S-16 NBR y Motor port no. in the case of 100 VAC: 812PG-100VAC Note) 14-20-50

51 Related Products: Heavy Duty Auto Drain ADH4000 Series Specifications Easy maintenance Float type uto-drain type A It is possible to maintain without changing xisting piping. e N.O. (Normally open: Open in the case of pressure loss) uto-drain valve type A No need for electric power and no 2.5 MPa Proof pressure waste of air. 1.6 MPa Max. operating pressure Float style drain allows automatic drain Note) discharge without electric power. 0.05 to 1.6 MPa Operating pressure range Note) Compressed air Fluid Ambient and C (With no condensation) 5 to 60 ° Mounting example Fluid temperature Aftercooler Air tank Max. drain discharge 400 cc/min (Pressure 0.7 MPa, in the case of water) Air dryer W eight 1.2 kg (With bracket: 1.3 kg) aint color P Light gray l /min (ANR). Note) Use for air compressor with flow more than 50 Air compressor ADH4000 ADH4000 Accessory (Option) Description Contents no. Part Bracket ····································1 pc. BM58 Bracket set l M6 x 10 (Hex. bolt) ················· 2 pcs. Ball valve/Rc 1/2 ············ ··· ············ 1 pc. Barrel nipple/R 1/2 ························ 2 pcs. Ball valve piping set ADH-C400 ········ ············ 1 pc. Elbow/Rc 1/2 ············ Note) The accessories (Option) are shipped unassembled, but packed in the same container. How to Order Ball valve piping set  HA Bracket set ADH4000 04 AT Heavy duty ∗ JIS Symbol Accessory (Option) auto-drain ID  No option (Standard) Nil Bracket set B Basic size Ball valve piping set C AMG ∗ Notes AFF 1) When more than one option is desired, list in alphabetical order. 2) Accessories are not factory AM  assembled. 3) Refer to each drawing for details Thread type of dimensions and mounting Misc. Nil Rc methods. F G 4) Accessory “C” is available only N NPT with Rc thread. Port size 1/2 (Female thread) 04 14-20-51

52 Series ADH4000 Construction Component Parts u qo i 1 ! No. Note Description Material q luminum alloy A Baking finish Body w w Baking finish Aluminum alloy Housing e Aluminum alloy Baking finish Drain guard r F oam rubber Float y IN t Stainless steel + Rubber Pilot valve y Resin Lever u Brass Flushing button i t Orifice r o Rubber Diaphragm 10-1 Replacement Parts e No. Note no. Part Description 10-2 0 ! ADH-D400 Repair kit for main valve Kit includes parts from 10-1 to 10-5. 10-3 1 ! ! 0 G85(B) Material: NBR O-ring Note) When changing parts, follow the instruction manual. 10-4 Do not disassemble other parts. 10-5 OUT Precautions Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and pages 14-14-6 to 8 for Precautions on every series. Mounting Caution on Design Caution Caution 1. Install with “out port” down in a vertical position. 1. Operate this product in an area in which the air ° . Inclination from the vertical line should be less than 5 pressure does not exceed 1.6 MPa. If this value is exceeded, it could lead to an accident or 2. Install with at least 200 mm of free space above the malfunction. unit to allow for maintenance. 2. An air pressure of 0.05 MPa and an air compressor’s To place this product near the air compressor, install in such a 3. y that the vibrations will not be transmitted. wa /min (ANR) are discharge flow rates higher than 50 l required. 4. Install a valve to drain inlet so that maintenance is Below these values, the air will continue to be discharged from possible. the drainage discharge port. Use a ball valve with a bore size of more than 15 mm to ensure 3. K eep the compressed air temperature and the ambient proper flow-in of drain. (Ball valve piping set is available as temperature of the location in which this product is installed optional accessory.) Exceeding this range could lead within the range of 5 to 60 ° C. When not draining sufficiently, adjust the open angle of its 5. to failure or malfunction. b leed valve to lower the pressure inside the case, so that drain- 4. Avoid operating this product in an area in which age will run through easily. corrosive gases, flammable gases or organic Maintenance solvents are contained in the compressed air or in the surrounding air. Caution 1. Check drain condition periodically (more than Selection once a day). Then push flushing button to open exhaust valve. Caution Pilot air is exhausted from the exhaust port indicated in the 2. 1. The maximum dischargeable drainage rate is 400 Do not cover this exhaust port. “Dimensions” section. cc/min. Clean exhaust port so that port is not blocked by dust, etc. If the product is operated in excess of this value, there is a risk When solid foreign objects exceeding 1 mm comes in, the 3. of causing the drainage to flow over to the outlet side. main valve may become blocked. After recovering the internal Piping pressure of this product to 0 MPa (atmospheric pressure), re- move the hexagon socket head bolt (M6) from the body part Caution and wash inside with water to remove foreign solid particles locking the main valve. b 1. Use piping of 1/2B bore size or larger for drain inlet 4. While operating, there may be cases where drainage will not and allow for unobstructed flow-in for drain. easily enter this product. In such a case, adjust the open an- Drain line should be 8 mm or more in diameter and less than 2. gle of its bleed valve to lower the pressure a bit inside the 10 m in length. Do not make any upward angles in drain line. bowl, so that drainage will run through easily. Be sure to secure exhaust port piping since drain is under pressure. 14-20-52

53 Series Heavy Duty Auto drain ADH4000 Dimensions 108 M6 hex. socket head bolt (including bracket set) [Applicable hex. wrench nominal size 5] 100 M6 hex. socket head bolt (including bracket set) 33 58 [Applicable hex. wrench nominal size 5] Pilot exhaust port 100 Bleed valve Flushing button Bracket mounting hole Bracket (Option) (Both sides) Drain inlet 1/2 female thread 120 (Refer to “How to Order” for type of thread.) 100 200 7 8 (Space for maintenance) 16 10 30 Product label Octagonal width across flats 30 189 171 Caution label (176) 155 Hexagon width across flats 27 Drain outlet 1/2 female thread HA  (Refer to “How to Order” for type of thread.) AT Option: Reference Figure of Assembly ID  Piping example of ball valve piping set (41) (45) AMG AFF (54) AM  (100) Misc. 14-20-53

54 Related Products: Pressure Differential Gauge GD40-2-01 Model/Specifications GD40-2-01 Model The pressure differential at Fluid Compressed air the inlet and the outlet of Max. operating pressure 1 MPa compressed air equipment Proof pressure 1.5 MPa Ambient and fluid temperature 5 to 60 C ° can be viewed at a glance 1 Port size Rc 8 on the pressure differential Scale range 0 to 0.2 MPa gauge. It is ideal for the ± 0.006 MPa Accuracy 40 Dial size maintenance control of fil- Weight (g) 300 ters. Principal Parts Material Option Accessory Compact and lightweight T0425 (0.5 m) Case Nylon tube Zinc die-casted It can be installed easily by merely Half union H04-01 (1 pc.) Internal part Brass, Phosphor bronze providing a bypass circuit. Elbow union DL04-01 (1 pc.) Window Chloroethylene Provided with a protective cover to Pointer scale Stainless steel prevent hazards. Precautions Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and refer to 14-14-6 to 8 for precautions on every series. Caution on Design Mounting Caution Caution 1. Mounting This product cannot be operated in a 1. 1) The HIGH and LOW marks on the location in which pulsations frequently back of the differential pressure occur. gauge indicate the high pressure and low pressure sides, respectively. Connect the HIGH side to the inlet side of the filter or other devices and the LOW side to their outlet side. Do JIS Symbol not use a stop valve to prevent damage to the differential pressure gauge if the valve is inadvertently left open or closed. 2) Install the differential pressure gauge ve r tically. 3) The piping of the differential pressure gauge must be connected securely because it will break if it becomes detached. Piping Example Dimensions Thread for mounting bracket Low pressure side Pressure gauge Inlet side High pressure side Outlet side Thread depth 7 14-20-54

55 ater Separator, Oil Mist Separator, Deodorizer W Made to Order Specifications: Please consult with SMC for detailed specifications, size and delivery. 2. With IN-OUT Flange 1. With Differential Pressure Gauge (GD40-2-01) Makes flange piping easier. (Flange material: Carbon steel) A differential pressure gauge that keeps track of the filter life is installed on the filter itself. This facilitates piping and achieves a compact design. Specifications Specifications Applicable model AFF11B to 75B Applicable model AFF2B to 75B ∗ Refer to “How to Order” for standard ∗ Refer to “How to Order” for standard How to Order specifications on page 14-20-10. How to Order specifications on page 14-20-10. X15 X6 AFF AFF ∗ ∗ ∗ ∗ Body size Body size Option Option (Impossible with -T) ∗ ∗ ∗ Accessory Thread type Thread type ∗ Accessory ∗ size Port ∗ size Port Specifications Specifications AM, AMD, AMH450 to 850 Applicable model AM, AMD, AMH150 to 850 Applicable model ∗ Refer to “How to Order” for standard specifi- Refer to “How to Order” for standard specifications ∗ How to Order How to Order cations on pages 14-20-16, 23 and 31. on pages 14-20-3, 16, 23, and 31. AM AM X6 X15 AMD AMD AMH AMG ∗ Option ∗ Body size (Impossible with -T) AMH ∗ ∗ ∗ Option Body size ∗ Thread type Accessory ∗ ∗ size Port Thread type ∗ Accessory Note) Series AMG is not applicable since there may be cases ∗ Port size where water drops ingress inside its differential pressure gauge, resulting in malfunction or damage to the product. Dimensions Dimensions A Connection B  HA OUT IN AT OUT IN  ID A B AMG AFF AM  Drain Drain Misc. Series AM, AMD, AMH Series AFF Series AM, AMD, AMG, AMH Series AFF A B size Por t Connection B A Size Size Size Size 150 239 2B 80 1/8 , 1/4 , 3/8 450 256 11B 240 3/4B, FF, 10K 252 1/4 , 3/8 550 22B 300 260 1B, FF, 10K 80 250 4B 258 1 1/2 650 37B 349 300 1 B, FF, 10K 2 284 3/8 , 1/2 850 75B 496.5 380 2B, FF, 10K 80 8B 350 290 3/4 305 1/2 , 3/4 80 11B 450 312 1 550 339 22B 80 3/4 , 1 1 650 391 37B 80 1 , 1 2 1 850 540.5 75B 80 1 , 2 2 14-20-55

56 ater Separator, Oil Mist Separator, Deodorizer W Made to Order Specifications: Please consult with SMC for detailed specifications, size and delivery. 4. N.C., N.O. Auto-drain, Drain Piping Type 3. With Differential Gauge (GD40-2-01), IN/OUT Flange This is the drain piping type (drain guide specification), which can connect This is the type, on which a differential pressure gauge is mounted on the the drain piping on the part of discharging the drain from N.C. auto-drain main body to monitor the life of a filter by checking its clogging status. ts on IN and OUT are of a flange connection type. (Flange material: and N.O. auto-drain. r Po Carbon steel) Specifications Specifications Applicable model AFF2B to 37B Applicable model AFF11B to 75B Refer to “How to Order” for standard spec- ∗ Refer to “How to Order” for standard spec- ∗ How to Order How to Order ifications on page 14-20-10. ifications on page 14-20-10. X26 AFF X17 AFF ∗ ∗ ∗ Option ∗ Body size Option Body size (Impossible with -T) (Specifications of drain cock and ∗ ∗ Thread type drain guide are not available.) Thread type ∗ Accessory ∗ Accessory ∗ size Port (Only available for N.C., N.O. auto-drain.) ∗ Port size Specifications Specifications ∗ 150 to 650 Applicable model AM Applicable model AM, AMD, AMH450 to 850 Refer to “How to Order” for standard specifi- ∗ ∗ Refer to “How to Order” for standard specifi- cations on pages 14-20-3, 16, 23 and 31. cations on pages 14-20-16, 23 and 31. How to Order How to Order X26 AM X17 AM AMD AMD ∗ Option ∗ AMG AMH Option (Specifications of drain cock and (Impossible with -T) ∗ Body size drain guide are not available.) AMH ∗ Accessory ∗ Body size ∗ Thread type ∗ Accessory ∗ Port size ∗ (Only available for N.C., N.O. Thread type auto-drain.) Note) Series AMG is not applicable since there may be cases where water drops ingress inside its differential pressure ∗ Port size gauge, resulting in malfunction or damage to the product. Dimensions Dimensions C Connection B OUT IN (A) A 20 1/4 female thread Drain Drain Series AFF Series AM, AMD, AMH Series AFF Series AM, AMD, AMH Connection A BC A size Por t Size Size Size Size 450 150 305 11B 240 2B 159 3/4B, FF, 10K 1/8B, 1/4B, 3/8B 550 22B 339 260 172 1B, FF, 10K 1/4B, 3/8B 80 250 4B 1 650 37B 391 300 178 1 B, FF, 10K 1/2B 2 850 75B 540.5 380 204 2B, FF, 10K 3/8B, 1/2B 350 8B 210 3/4B 225 1/2B, 3/4B 450 11B 232 1B 550 259 22B 3/4B, 1B 1 650 311 37B 1B, 1 B 2 14-20-56

57 ater Separator, Oil Mist Separator, Deodorizer W Made to Order Specifications: Please consult with SMC for detailed specifications, size and delivery. 6. Middle Pressure (1.4 MPa) Specifications 5. White Vaseline Specifications Withstands up to 1.4 MPa of maximum operating pressure. This is the type which has changed the oil and grease used for O-rings and gaskets as lubricant to white vaseline. Specifications Specifications Applicable model AFF2B to 22B Applicable model AFF2B to 75B Refer to “How to Order” for standard ∗ ∗ Refer to “How to Order” for standard How to Order How to Order specifications on page 14-20-10. specifications on page 14-20-10. X20 AFF X12 AFF ∗ ∗ Body size Body size ∗ ∗ Option Option (-T is not available.) ∗ ∗ Thread type Thread type ∗ Accessory ∗ Accessory ∗ (Auto drain is only available Port size for N.O. type.) ∗ Port size Specifications Specifications AM, AMD, AMG, AMH150 to 550 Applicable model Applicable model AM, AMD, AME, AMF, AMG, AMH150 to 850 ∗ ∗ Refer to “How to Order” for standard Refer to “How to Order” for standard specifications on pages 14-20-3, 16, 23, specifications on pages 14-20-3, 16, 23 How to Order How to Order 31, 37 and 43. and 31. X12 X20 AM AM AMD AMD AME AMG ∗ ∗ Option Option AMF AMH (-T is not available.) ∗ Body size ∗ AMG Accessory ∗ Accessory ∗ Thread type ∗ (Auto drain is only available Port size AMH for N.O. type.) ∗ Body size ∗ Port size ∗ Thread type Specifications Applicable model AME, AMF150 to 950 HA  Refer to “How to Order” for standard ∗ How to Order specifications on pages 14-20-37 and 43. AT X20 AME m) μ 7. Mist Separator for Large Flow (0.3  ID AMF Use it when the conventional mist separator (Series AM) cannot dispose of a ∗ Option large flow rate. Specifications other than the filtration are all equivalent to that of AMG ∗ Body size AFF75A to 220A. ∗ ∗ Thread type AFF Accessory ∗ Specifications Port size AM  Applicable model AFF75A to 220A Refer to “How to Order” for standard ∗ Misc. How to Order specifications on page 14-20-10. X13 AFF Basic size (Applicable compressor rating) Accessory (Option) Port size 14-20-57

58 W ater Separator, Oil Mist Separator, Deodorizer Special Specifications: Please consult with SMC for detailed specifications, size and delivery. Copper-free Series (20-Series) Clean Series (10-Series) eliminate effects on color CRTs, etc. by copper ion or fluorine resin, Clean Series products are those which can be used in cleaner To environments, such as in clean rooms, as compared to a general factory copper materials are electroless-nickel plated or changed to copper-free materials to prevent the generation of copper ions. environment. F or further details, refer to the Clean Series catalog. (It is not applicable to Series AMD, AME, AMF and AMH because they include fluorine resin in the filter material of the element.) Specifications Specifications Applicable model AFF2B to 75B AFF2B to 37B Applicable model ∗ Refer to “How to Order” for standard specifi- ∗ Refer to “How to Order” for standard specifi- cations on pages 14-20-10, 16, 23, 31, 37 How to Order cations on pages 14-20-3, 10 and 16. How to Order and 43. C AFF 10 J AFF 20 D ∗ Body size ∗ Body size Note) Note) With drain ∗ ∗ Thread type Thread type guide ∗ Port size ∗ Port size Accessory Note) Note) Accessory Option Symbol Description Option Description Symbol R IN-OUT reversal direction No accessory Nil R IN-OUT reversal direction Nil No accessory T Element service indicator B Bracket T Element service indicator Bracket B Note) “20-” is applicable only to products with N.C. auto-drain (C) or N.O. auto-drain (D). Drain cock and drain guide are cop- Note) “10-” is not applicable to the standard type (with drain cock) per-free as standard. and products with auto drain. Specifications Specifications AFF75B Applicable model AM, AMD, AMH150 to 850 Applicable model 20 AFF75B ∗ AM 10 J Thread type ∗ Option Port size AMD Accessory Note) AMH Description Symbol With drain Drain guide J guide 1/4B female thread ∗ No accessory Nil Body size R IN-OUT reversal direction B Bracket ∗ Thread type T Element service indicator N.O. auto-drain D ∗ Port size Option Specifications Note) Accessory AM, AMG150 to 650 Applicable model R Symbol Description IN-OUT reversal direction T Element service indicator No accessory Nil C Bracket B AM 20 D Note) “10-” is not applicable to the standard type (with drain cock) AMG and products with auto drain. ∗ Body size (Note) ∗ Thread type Specifications ∗ Port size AME, AMF150 to 850 Applicable model Note) Option Accessory Symbol Description AME 10 R IN-OUT reversal direction Nil No accessory T Element service indicator Bracket B AMF Note) “20-” is applicable only to products with N.C. auto-drain or N.O. auto-drain. Specifications of drain cock and drain guide are provided as standard to be copper-free. Option ∗ Body size Specifications ∗ Thread type R IN-OUT reversal direction Applicable model AM, AMG850 ∗ Port size Accessory 850 AM 20 Symbol Description AMG No accessory Nil ∗ Thread type B Bracket ∗ Option Port size Accessory Symbol Description Drain guide J 1/4B female thread No accessory Nil R IN-OUT reversal direction B Bracket T Element service indicator N.O. auto-drain D 14-20-58

59 Bowl Assembly /AM  -CA  Series AFF-CA  Bowl Assembly can be replaced without removing the main body from piping if the drain exhaust specification is to be Bowl assembly for Series AFF and AM  changed from the drain cock type to the auto-drain type or if the bowl has been damaged. How to Order Bowl Assembly Series AFF  4B CA AFF (3) Body size Thread type 2B Rc Nil 4B G F Accessory (Option) 8B N NPT (1) With drain cock A 11B Note 3) Corresponds to attachment symbols C, D, With N.C. auto-drain C 22B and J. Select according to the type of D With N.O. auto-drain threads used on the body. 37B (2) With drain guide J 75B Note 1) 75B size comes with a ball valve. Note 2) Drain piping, or piping for a stop valve, like a ball valve, is required. 75B size comes with a ball valve. substitute with (Symbol: A).  Series AM, AMD, AMH, AMG 150 CA AM AMD (3) Thread type AMH Nil Rc F G Accessory (Option) AMG N NPT (1) Body size A With drain cock Note 3) Corresponds to attachment symbols C, D, 150 With N.C. auto-drain C and J. Select according to the type of 250 With N.O. auto-drain D threads used on the body. (2) 350 With drain guide J 450 Note 1) 850 size comes with a ball valve. HA  Note 2) Drain piping, or piping for a stop valve, 550 like a ball valve, is required. 650 850 size comes with a ball valve. 850 AT substitute with (Symbol: A). Series AME, AMF   ID CA 250 AME A AMG AMF AFF Body size 150  AM 250 350 Misc. 450 550 650 850 14-20-59

60  -CA  , AM  AFF-CA Series Series AFF, AM, AMD, AMH, AMG Dimensions Size: AFF2B to 37B, AM 150 to 650  (B) (B) (B) (A) (A) (C) 20 20 34 M5 female thread 1/4 female thread Note) In the case of Rc, G: ø10 Drain Drain In the case of NPT: 3/8 Drain Drain guide Drain cock uto-drain A Series AM, AMD, AMG, AMH Series AFF A B C Size Size Note) Select in accordance with the type of thread on 2B 63 150 148 134 the main body. One-touch fitting applicable tube size 4B 76 147 161 250 In case that the type of thread is Rc, G: ø10 90 8B 173 187 350 In case that the type of thread is NPT: ø3/8 11B 106 188 202 450 122 22B 215 229 550 37B 160 245 650 259 Size: AFF75B, AM 850  (220) (220) 266 266 (344) 379 23 (58) 3/8 female thread Drain Rc 3/8 Drain 14-20-60

61 Bowl Assembly  -CA  , AM  AFF-CA Series Dimensions Series AME, AMF (B) (A) Series AME, AMF A B Size 114 150 63 76 250 127 90 350 153 106 450 168 122 550 195 160 650 225 220 319 850 HA  AT  ID AMG AFF AM  Misc. 14-20-61

62 Precautions Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and pages 14-14-6 to 8 for Precautions on each series. 2. Select according to the maximum flow Caution on Design consumption. When compressed air is used for air blow, etc., find the Caution maximum air consumption and then select the size of Series 1. Design the layout so that the mist separator is . (If compressed air exceeding the maximum flow rate  AM installed in an area that is less susceptible to is supplied, it can result in decline of the cleanliness of pulsations. compressed air or element damage.) The element could be damaged if the difference in the inlet and outlet pressures exceeds 0.1 MPa. Mounting 2. Be careful of dust generation by the pneumatic equipment mounted on the outlet side. Caution When installing pneumatic equipment on the outlet side of , dust particles may come off from outlet equipment,  Series AM 1. About the mounting orientation of the products which will lower the cleanliness of compressed air. Please Make sure to install this product on horizontal piping. If it is consider this impact upon the cleanliness of compressed air installed diagonally, laterally, or upside down, the drainage that when installing pneumatic equipment on the outlet side. is separated by the element will splash to the outlet side. About when to use N.C. auto-drain and N.O. auto-drain. 3. If the normally open (N.O.) auto-drain is used on AFF2B to Piping AFF75B or AM  150 to 850, air may ceaselessly blow out of the drainage discharge area in cases where an air compressor with Caution a small air discharge volume is used since it is designed so that the valve will not close unless the air pressure is 0.15 MPa or 1. Connect it with IN and OUT ports in proper location. higher. Therefore, when using a compressor for 3.7 kW or less, It does not work with the connection reversed. make sure to use the normally closed (N.C.) auto-drain. The  150 to 850 In the case of AFF2B to AFF75B and AM minimum operating pressure is 0.15 MPa even with auto-drain. Verify the direction of the flow of the compressed air and the 4. When using the auto-drain, connect the drain piping  “ ” mark that indicates the inlet of the product before in the following range: connecting. It cannot be used if connected in the opposite  150 to 650 with auto-drain are used: When AFF2B to AFF37B, AM direction. Normally closed (N.C.) Use tubing O.D. 10 mm and keep the Symbol which indicates the flow of Normally open (N.O.) whole length within 5 meters. compressed air IN  When AFF75B and AM 850 with auto-drain are used:  Use a tube with a bore of 9 mm or more and Normally open (N.O.): k eep the overall pipe length within 2.8 m. 5. Provide a design that prevents back pressure and back flow. Back pressure or back flow may damage an element. OUT 6. Design not to apply any load on piping of the main body.  150 to 850 In the case of AFF2B to AFF75B and AM The bracket that is provided with the product is for supporting the product itself. Thus, it cannot support the piping or other items that are connected. If these items need to be supported, provide an additional support. 7. Keep the certificate of Class 2 Pressure Vessel in a safe place. Products below are subject to Class 2 Pressure Vessel Act. Certificate will be sent 2 to 4 weeks after the shipment of the product. Main line filter···················AFF220A In the case of AFF75A to AFF220A, AMD801, 901, 800, 900, Micro mist separator·········AMD900, AMD1000, AMD901 and 1000 Selection INLET and OUTLET of compressed air is labeled on the side of flange. Be sure to connect correctly. Caution 2. Use an air blower to flush the piping before 1. About the system composition of purifying connecting the piping. compressed air Use an air blower to thoroughly flush the piping, or wash the piping to remove any cutting chips, cutting oil, or debris from Compressed air generally contains particulate contaminants as inside the piping before connecting them. listed below, though there are some variations due to the compressor type and specifications. Please determine the system 3. Wrapping of sealing tape configuration according to the desired cleanliness of compressed When screwing in the pipes or fittings, make sure to prevent air and application, while referring to the “Air Preparation cutting chips or the sealing material on the threaded portion of  Equipment Selection Guide” for Series AM on page 14-20-3. the pipe from entering the piping. If sealing tape is to be used, [Particulate contaminants in compressed air] leave about 1.5 to 2 ridges of threads uncovered. • Water (drainage) • Dust sucked from ambient air • Degenerated oil from compressor • Solid foreign matter such as rust inside piping and oil 14-20-62

63 Precautions Be sure to read before handling. Refer to pages 14-21-3 to 4 for Safety Instructions and Common Precautions on the products mentioned in this catalog, and pages 14-14-6 to 8 for Precautions on each series. When using AFF2B to AFF75B or AM  with drain 150 to 850 Air Supply cock, drain guide or ball valve, discharge the drainage be- f ore the drainage level reaches the center of the sight glass. If Caution the drainage is not discharged properly, it will flow over to the 1. The mist separator is not applicable to gases other outlet side. than compressed air. Sight glass The mist separator is not applicable to gases other than compressed air (example: oxygen, hydrogen, flamm able gas, mixed gas). 2. Do not use compressed air that contains chemicals, Liquid surface of drain organic solvents, salt, or corrosive gases. Discharge drainage until the drainage level reaches the center. Do not use compressed gas containing chemicals, organic solvents, salt or corrosive gas. This can cause rust, damage to nction. rubber and resin parts, or malfu 3. Operate within the specified operating p ressure range. 3. In the case of a type with auto drain, the drain can Damage, failure, or malfunction may occur if the mist separator is operated above the maximum operating pressure. be discharged manually. If the mist separator is used below the minimum operating In the case of AFF2B to AFF37B and AM 150 to 650, the  pressure, increase in the air-flow resistance due to clogging discharged with the knob tightened to drain is automatically will have such influence that the desired flow rate cannot be the S side. Manual drain discharge, however, is also possible. obtained. A manual knob attached to the auto-drain end is tightened to Operating Environment the “S” side in normal operation. The drainage can be dis- Caution charged by loosening it to the “O” side. (Be careful, however, if pressure remains inside the filter when the drain is discharged, 1. Do not use in the following environments, as this the drain will blow out from the drain port.) can cause failure. 1) In locations having corrosive gases, organic solvents, and chemical solutions, or in locations in which these elements are likely to adhere to the equipment. 2) In locations in which salt water, water, or water vapor could come in contact with the equipment. 3) In locations that is exposed to shocks and vibrations. 2. Be careful about the contamination of the workpieces due to entrainment of the ambient air. If compressed air is used for air blow, compressed air blowing out from the blow nozzle may entrain foreign matter (solid OS particles and liquid particles) floating in the ambient air, kpieces and causing adhesion. wo r blowing it against the Open Close Therefore, sufficient precautions must be taken about the ambient environment. 4. It is not possible to replace the auto-drain alone. HA  The entire bowl assembly must be replaced (except Maintenance sizes 75B and 650). Caution AT Auto-drains of sizes 2B to 37B and 150 to 650 cannot be replaced alone since they cannot be assembled without 1. Replace the element immediately when the time for dedicated assembly tools. The entire bowl assembly must be its replacement has arrived. ID  replaced. (Refer to “How to Order Bowl Assembly” on page To replace the element, please also replace the O-ring and the 14-20-59.) gasket. For the replacement procedure, please refer to the AMG 5. The drainage exhaust section can be replaced alone instruction manual. on the following types: (For the element dimensions, please refer to page 14-20-64.) AFF 1) Drain cock (2B to 37B, 150 to 650), drain guide (2B to 37B, 150 to 650), and ball valve set (75B, 850) can be replaced In the case of AFF2B to AFF75B or AMl150 to 850 alone.  AM The replacement interval for the element is when the pressure Please place an order using part numbers below. drop reaches 0.1 MPa or after two years of operation, whichever comes first. A pressure drop can be verified with the Part no. Applicable body size Product name Misc. type with a clogging checker (-T) or with the type with pressure AM-SA002 Drain cock 2B to 37B, 150 to 650 differential gauge (Made to Order Specification). AM-SA003 Drain guide In the case of AFF75A to AFF220A, AMD800 to AMD1000, or Ball valve set 75B, 850 AM-SA004 AMD801, 901 2) The auto-drain can be replaced alone on sizes 75B and The replacement interval for the element is when the pressure 850. However, auto-drain replacement requires dedicated drop reaches 0.1 MPa or after one year of operation, tools. whichever comes first. Please confirm the pressure drop with a Model Applicable body size Product name pressure gauge. (Type with pressure gauge: -G) Auto-drain AD43PA-D 2. Be sure to exhaust the drain accumulated in the 75B, 850 Jig for replacing auto-drain AM-SA005 filter container. F ailure to discharge the drainage will allow the accumulated drainage to flow over to the outlet side. 14-20-63

64 2. About oil-free products Other includes parts that does not allow Series AFF and Series AM  degreasing wash (resin parts, rubber parts, and elements). There- Caution ore, oil-free product with all parts degreased is not available. f 1. Element interchange 3. Degreasing wash ollowing is the element dimensions for Series AFF and Series F Certain parts that allow degreasing wash, such as the body and AM :  housing, can be washed for degreasing. Please contact SMC after Since elements for the same body size has the same dimensions, making explicit specifications (available as made-to-order specifi- they are interchangeable. cations). However, do not interchange them easily since it can cause vari- 4. Change of oil ous kinds of problems. On Series AFF and Series AM , no oil such as grease is applied  If interchanging the elements is unavoidable, please also replace to parts exposed to compressed air. However, for certain specifica- the product label with the model number. tions, there are some parts to which oil is applied. It is possible to change the type of oil applied. (Available as made-to-order) 5. Internal volume of filter container The product can be used as a small capacity air tank by removing the element. B ollowing is the volume of filter containers of Series AFF and F (when the element is removed). Series AM  V olume Inside Filter øA Volume inside filter (Reference value) Model 3 ) (cm Dimensions of Element AFF2B, AM150 250 AMD150, AMH150 Dimensions of element (Reference value) Model AFF4B, AM250 øA B 300 AMD250, AMH250 AFF2B, AM150 42 49 AFF8B, AM350 AMD150, AMH150 600 AMD350, AMH350 AFF4B, AM250 52 58 AFF11B, AM450 AMD250, AMH250 1000 AMD450, AMH450 AFF8B, AM350 78 70 AFF22B, AM550 AMD350, AMH350 1500 AMD550, AMH550 AFF11B, AM450 88 82 AFF37B, AM650 AMD450, AMH450 3000 AMD650, AMH650 AFF22B, AM550 96 118 AFF75B, AM850 AMD550, AMH550 9000 AMD850, AMH850 AFF37B, AM650 122 144 AMD650, AMH650 AFF75B, AM850 142 223 AMD850, AMH850 Information on Items to be Discontinued and Equivalent Products were remodeled to products introduced in this catalog in 1988. Series AFF and AM  of metal dies Along with the new models, old models have also been provided mainly for the purpose of maintenance. However, due to the aging and extreme decline in the quantity, the procurement of parts and consequently the maintenance of the production system have be come difficult. F ere. or this reason, old parts were discontinued in 1994, as detailed in the table below. Please use the equivalent parts listed th Discontinued Products and Equivalent Products Product equivalent Discontinued Period of production External dimension Period of External dimension Product name discontinuance Page of a product production of a product Model Model Component parts Width x Depth x Height discontinuance Width x Depth x Height for maintenance End of March '99 76 x 76 x 178 End of July '94 AFF6 100 x 100 x 253 AFF4B End of March '99 122 x 122 x 259 End of July '94 AFF22 150 x 140 x 446 AFF22B Main Line Filter 14-20-9 End of March '99 160 x 160 x 311 End of July '94 AFF37 200 x 170 x 526 AFF37B End of March '99 220 x 220 x 461 End of July '94 AFF55 280 x 280 x 497 AFF75B End of March '99 63 x 63 x 159 End of July '94 AM200 63 x 63 x 191 AM150 End of March '99 76 x 76 x 172 (178) End of July '94 AM300 85 x 85 x 258 AM250 End of March '99 90 x 90 x 204 (210) End of July '94 AM400 Mist Separator 120 x 120 x 236 AM350 14-20-16 End of March '99 122 x 122 x 259 End of July '94 AM500 140 x 140 x 383 AM550 End of March '99 160 x 160 x 311 End of July '94 AM600 180 x 170 x 465 AM650 End of March '99 63 x 63 x 159 End of July '94 AMD100 63 x 63 x 136 AMD150 End of March '99 76 x 76 x 172 (178) End of July '94 AMD200 80 x 82 x 170 AMD250 End of March '99 90 x 90 x 204 End of July '94 AMD300 90 x 90 x 233 AMD350 Micro Mist Separator 14-20-22 End of March '99 106 x 106 x 225 End of July '94 AMD400 140 x 140 x 380 AMD450 End of March '99 122 x 122 x 259 End of July '94 AMD500 140 x 140 x 490 AMD550 End of March '99 160 x 160 x 311 End of July '94 AMD600 140 x 140 x 590 AMD650 End of March '99 76 x 76 x 152 (158) End of July '94 AMF200 80 x 80 x 153 AMF250 End of March '99 90 x 90 x 184 End of July '94 AMF300 90 x 90 x 216 AMF350 End of March '99 106 x 106 x 205 End of July '94 Odor Removal Filter AMF400 140 x 140 x 250 AMF450 14-20-42 End of March '99 122 x 122 x 239 End of July '94 AMF500 140 x 140 x 360 AMF550 End of March '99 160 x 160 x 291 End of July '94 AMF600 140 x 140 x 460 AMF650 Note: Some models have different heights depending on the port size. They are shown in parentheses. 14-20-64

Related documents

CityNT2019TentRoll 1

CityNT2019TentRoll 1

STATE OF NEW YORK 2 0 1 9 T E N T A T I V E A S S E S S M E N T R O L L PAGE 1 VALUATION DATE-JUL 01, 2018 COUNTY - Niagara T A X A B L E SECTION OF THE ROLL - 1 CITY - North Tonawanda TAX MAP NUMBER ...

More info »
doj final opinion

doj final opinion

UNITED STAT ES DIS TRICT COURT IC F OR THE D ISTR T OF CO LU M BIA UNITED STAT F AMERICA, : ES O : : la in t if f, P 99 No. on cti l A vi Ci : 96 (GK) -24 : and : TOBACCO-F UND, : REE KIDS ACTION F : ...

More info »
DoD7045.7H

DoD7045.7H

DoD 7045.7-H EPARTMENT OF D EFENSE D F UTURE Y EARS D EFENSE P ROGRAM (FYDP) S TRUCTURE Codes and Definitions for All DoD Components Office of the Director, Program Analysis and Evaluation A pril 2004

More info »
JO 7400.11C   Airspace Designations and Reporting Points

JO 7400.11C Airspace Designations and Reporting Points

U.S. DEPARTMENT OF TRANSPORTATION ORDER FEDERAL AVIATION ADMINISTRATION 7400.11C JO Air Traffic Organization Policy August 13, 2018 SUBJ: Airspace Designations and Reporting Points . This O rder, publ...

More info »
MDS 3.0 RAI Manual v1.16 October 2018

MDS 3.0 RAI Manual v1.16 October 2018

Centers for Medicare & Medicaid Services Long-Term Care Facility Resident Assessment Instrument 3.0 User’s Manual Version 1.16 October 2018

More info »
G:\COMP\PHSA\PHSA.bel

G:\COMP\PHSA\PHSA.bel

G:\COMP\PHSA\PHSA-MERGED.XML PUBLIC HEALTH SERVICE ACT [As Amended Through P.L. 115–408, Enacted December 31, 2018] References in brackets ¿ ø¿ ø are to title 42, United States Code TITLE I—SHORT TITL...

More info »
07 5123 06 zigbee cluster library specification

07 5123 06 zigbee cluster library specification

ZigBee Cluster Library – 075123 Document ZigBee Cluster Library Specification Revision 6 Draft Version 1.0 - 0125 Chapter Document: 14 5123 - 07 ZigBee Document: 06 - ZigBee Document 07 - 5123 201 4 J...

More info »
2017 NAICS Manual

2017 NAICS Manual

ORTH N A MERICAN I NDUSTRY LASSIFICATION C YSTEM S United States, 2017 EXECUTIVE OFFICE OF THE PRESIDENT AND BUDGET OFFICE OF MANAGEMENT

More info »
Untitled

Untitled

Harmoniz ed vision 4 hedule of the United States (2019) Re Tariff Sc Annotated f poses ting Pur or Statistical Repor GN p .1 GENERAL R ATION ULES OF INTERPRET inciples: wing pr ollo y the f verned b i...

More info »
Department of Defense   Law of War Manual (June 2015)

Department of Defense Law of War Manual (June 2015)

D E A R T M E N T O F D E F E N S E P N A L O F W A R M A W U A L J U N E 2 0 1 5 O F F I C E O F G E N ER A L C O U N S E L D P A R T M E N T E O F D E F E N S E

More info »
a i4787e

a i4787e

2015 ISSN 2412-5474 nimal genetic resource diversity underpins the supply livestock products and A services across a wide range of production environments. It promotes resilience and serves as a basis...

More info »
LawReferenceBook2018

LawReferenceBook2018

California Contractors License Law & Reference Book 2018 Edition With Rules and Regulations Contractors State License Board State of California Edmund G. Brown, Jr., Governor

More info »
ppacacon

ppacacon

111 TH C ONGRESS " ! LEGISLATIVE COUNSEL P RINT 111–1 2d Session COMPILATION OF PATIENT PROTECTION AND AFFORDABLE CARE ACT [As Amended Through May 1, 2010] INCLUDING P ATIENT P ROTECTION AND A FFORDAB...

More info »
pisa 2012 results volume I

pisa 2012 results volume I

PISA 2012 Results: What Students Know and Can Do tICS, themA StuDent PeRfoRmAnCe In mA ReADIng AnD SCIenCe Volume I rogramme for ssessment A tudent S nternational I P

More info »
E:\PUBLAW\PUBL031.115

E:\PUBLAW\PUBL031.115

131 STAT. 135 PUBLIC LAW 115–31—MAY 5, 2017 * Public Law 115–31 115th Congress An Act Making appropriations for the fiscal year ending September 30, 2017, and for May 5, 2017 other purposes. [H.R. 244...

More info »
Handbook: Revenue for software and SaaS

Handbook: Revenue for software and SaaS

Revenue for software and SaaS Handbook US GAAP December 201 8 _____ kpmg.com/us/ frv

More info »
Baldwin Copyright Wars CC.pdf

Baldwin Copyright Wars CC.pdf

The Copyright Wars T THE COPYRIGHT WARS: THREE CENTURIES OF TRANS-ATLANTIC BATTLE by Peter Baldwin is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licens...

More info »
199613

199613

Georg G. Raffelt Stars as Laboratories for Fundamental Physics The Astrophysics of Neutrinos, Axions, and Other Weakly Interacting Particles Final Manuscript, October 1995 Published by the University ...

More info »
ayout 1

ayout 1

0465039146-FM:FM 12/5/06 12:25 AM Page i C O D E

More info »